ISOG11
8Pages

UNIVERSAL TOOL GRINDING EFFICIENT GRINDING The ISOG 11 was specially designed for grinding preci sion tools. With the ISOG 11 single tools and small batches can be ground fast, economically and flexibly – and all this with high ease of use. The ISOG 11 even masters most complex, demanding and highly precise tools with brilliant performance. The ISOG 11 is already equipped with substantial extras in the basic version, in an abundance and with a practi cality that you will only find with the ISOG 11. And with good reason: We want you to be enthusiastic about the performance of your machine...

PROPERLY THOUGHT-OUT EXTRAS A universal indexing head for precision at any position Whether fly-mounted or between centers – with this com pact universal indexing head, you can clamp tools of al most any geometry and size. Each of the two setting axes can be swung around by 360°, and zero positioning can be done by an unlocking 180° stop. This universal indexing head is available with an SK40 spindle taper. The built-in dividing unit can be easily oper ated with one hand. A worm-gear fine setting device, by means of which you can radially adjust and exactly position the tool clamped in the...

THE RADIUS GRINDING ATTACHMENT With the radius grinding attachment for the ISOG 11, you can grind perfect radii on any tools, no matter whether they are convex, concave or straight, or have straight or spiral flutes. Even for difficult radii such as the flutes in the radius areas of die sinking cutters or for flanks on radius tools with spiral flutes, the ISOG 11 provides proof of its really impressive strength: transition less grinding of radius and peripheral flanks in one single, continu us pass. This unique method of o comfortable radius grinding is only offered by the ISOG 11....

ACCESSORIES SORTED BY APPLICATION Order number Cylindrical and taper-shank end mills, shell end mills Side mills, T-slot cutters, single and double angle cutters Die sinking cutters, radius cutters Twist drills *) Straight-fluted multi-step counterbores Spiral-fluted multi-step counterbores Form turning tools Countersinks, taps Radius turning tools (radial relief, profile relief) Hollow-out turning tools, form cutters Notes on the accessory items required to a limited extent X – Necessary accessories X – Accessories required to a limited extent a) Not required if only bevel lead/chamfer is...

OVERVIEW ACCESSORIES 1 Universal index head Order no.: 2555201 2 Spiral and relief grinding attachment Order no.: 2580000 3 Support arm assembly Order no.: 2576000 Setting gauge Order no.: 2665000 Support finger for radius cutters Order no.: 2618004 Universal setting gauge Order no.: 2570000 Universal wheel dresser Order no.: 2628000 Drive motor unit Order no.: 2667000 Machine vice Order no.: 2635000 Opto-electronic measuring unit with video Order no.: 2684X00 The machine vice is adjustable about three axes. It is used for grinding simple turning tools and for other operations. Recommended...

TECHNICAL DATA Clamping range Tool slide clamping surface Max. tool Ø, fly-mounted on universal index head Max. tool length between centers T-slot width, machine base T-slot width, grinding head, tool slide and attachments Max. tool Ø between centers Grinding spindle Three-phase AC drive motor Rated spindle torque Infinitely variable spindle speeds Dimensions Weight Floor space (incl. operator) Connected load Tool slide transverse travel Grinding head vertical travel Grinding spindle axial feed Tool slide carrier Grinding head carrier Universal index head on tool slide Coarse settings...