PreciFluid Easy Volumetric Dispensing System Volumetric dispensing system manufacture www.precifluid.com – [email protected]

DATA SHEET PreciFluid EasyVolumetric Dispenser PreciFluid Easy Advantages • Constant volumetric dispensing • Fully electric, no need of compressed air • Easy to set up : choose the size of the DropGun, the volume (cc), the speed rate (cc/sec) and then start the dispensing process. • All-digital, multi-function & multilingual display • Automatic or manual mode Based on the patented technology of volumetric dispensing, the Precifluid Easy is an entry level product of the PRECIFLUID range. The Precifluid Easy is insensitive to viscosity changes due to its electromechanical movement which ensures...

DATA SHEET PreciFluid EasyCharacteristics DropTips • Standard colors • Certified silicone free • Certified silicone free • Metal insert • Free driping • Perfect adjustment The lineardistribution system, equipped with step-by-step motor and an endless screw, that guarantees the same displacement for each dispense until the syringe is empty. Stability is the most important factor for constant fluid dispense. CHARACTERISTICS Minimum volume 0.06 p l Maximum viscosity 500 000 cps Instinctive use Robust design in anodized aluminum Weight less than 100 grams Gun available : 3, 5, 10cc - 30cc Volumetric...

PreciFluid Easy DATA SHEET Functions Thanks to a high performance linear actuator, the PreciFluid easy® performs a linear progression of the piston in contact with the fluid. The screw activated by the step-by-step motor is highly precise and push the piston with the metal insert. The system also offers a high pushing capacity going beyond 500,000 cps with a torque multiplication. The dispensing cycle consists in the forward movement of the piston in a defined volume and speed. The equipment can operate in two modes: • • Manual: As long as the cycle is activated by the foot pedal or finger switch...

PreciFluid Easy DATA SHEET SPECIFICATIONS Size 3cc Number of steps per revolution of the motor 20 Ratio of the gearbox 64 Screw size in mm 1 Forward screw [mm] 40 Linear displacement steps[mm] 0,000781 Section of the syringe [mm2] 70.88 Usable volume max [cc] Volume by steps [mm3] Volume by steps [cc] SPECIFICATIONS Size 5cc Number of steps per revolution of the motor 20 Ratio of the gearbox 64 Screw size in mm] 1 Forward screw [mm] 30 Linear displacement steps[mm] 0,000781 Section of the syringe [mm2] 124.69 Usable volume max [cc] Volume by steps [mm3] Volume by steps [cc] Volumetric dispensing...

DATA SHEET Number of steps per revolution of the motor 24 Ratio of the gearbox 51.84 Linear displacement steps[mm] 0,002411 Number of steps per revolution of the motor 24 Linear displacement steps[mm] Volumetric dispensing system manufacture www.precifluid.com - [email protected]

PreciFluid Easy DATA SHEET SPECIFICATIONS Dimensions Size L*l*H 163 x 129 x 72 Weight 500 g Outer- power supply range of input voltages 110-240V Maximum inrush current 2A 2A Range of input frequencies 50-60Hz Output Voltage 9V Output Current 1,5A Output power 13,5W Control circuit MSP430 Interface Numeric keypad Cycle start signal Foot pedal or finger switch Cycle signal Static output Volumetric dispensing system manufacture www.precifluid.com – [email protected]