Catalog excerpts
CMI Shear beam load cell 04/2006 Application Remarks A mechanical stop must protect the load cell against "static" overloads. The ajustment of this stop must leave a gap at least equal to the load cell’s deflection under full load. The load cell must also be protected by shock absorbers against shocks, dynamic overloads or vibrations. Mechanical installation On metal foot The force to be measured must be applied on the axis of the load point, without gap, inclination or torsion. Application Scales. Weighing silos, hoppers, tanks. Presentation General information The CMI load cell consists of a stainless steel body and is hermetically sealed by laser welded stainless steel cups. Right mounting Wrong mounting On a metal supporting structure It has been designed for used in industrial environments with an aggressive atmosphere, such as the chemical industry. CMI load cells have a test certificate for 3 000d. Meating the IP 68 standard, CMI load cells are compact and available in four capacities: 500, 1 000, 2 000 and 5 000 kg. The load cell must be fitted on the axis of the structure. Special mounting parts to adapt the load cell to its mechanical environment are available as an option. Description The working principle of the CMI load cell is to measure the deformation of a beam subjected to shear stress. The strain gauges are arranged to form a Wheatstone bridge, converting the mechanical force exerted on the load cell into an electrical signal. Right mounting Wrong mounting Test certificate issued by a notified body in accordance with OIML recommendation R60. The supporting structure must be so stiff that it does not bend under the weight of the load. Reinforcement of the structure may in some cases be necessary. Option Ex version for use in explosive and according to new directive 94/09/ CE. EEx ia IIC T6. CE type certificate Nr : LCIE 02 ATEX 6083 X Wiring Junction box V sense + V sense − V in +
Open the catalog to page 1Technical data Dimensions Maximum load Breaking load Deflexion under nominal load Fixation screws (not supplied) * Minimum length = 45 mm ** Minimum length = 65 mm Metrological data Nominal load Minimum load Minimum division Options* Hopper mounting - Shock absorber Standard marking Hopper mounting - Ball bearing and stop Traction mounting with rings CMI A951 (modèle) SDM N°00.07 N°XXXXXX IP68 Fabriqué en 200X PRECIA MOLEN BP106 07000 PRIVAS FRANCE * Arrangement may vary with each model....
Open the catalog to page 2All PRECIA MOLEN catalogs and technical brochures
-
ROC V4 Weighbridge
2 Pages
-
i 35 Weighbridge indicator
2 Pages
-
I 200 Ex Indicator
2 Pages
-
LABORATORY SCALES
4 Pages
-
NEW COMPACT SCALE RANGE
2 Pages
-
MAIL AND PARCEL
4 Pages
-
i 25 touch
6 Pages
-
CKW 410 LOG
2 Pages
-
CKW 710
2 Pages
-
Weighing indicator i5
2 Pages
-
Weighing pallet truck TPN-B
2 Pages
-
Weighing scale C 131 AM
2 Pages
-
Weighing scale C 130 AB
2 Pages
-
Weighing scale C 15 AG-S
2 Pages
-
Weighing bars R2 Range
2 Pages
-
I 410 SYSTEM
6 Pages
-
PRECIA ACCESS
8 Pages
-
Light industrial scales
6 Pages
-
LOAD CELLS
2 Pages
-
HOPPER SCALES
2 Pages
-
Product guide
28 Pages
-
The new i series
6 Pages
-
STORAGE SILOS
2 Pages
-
QUARRIES / SAND PITS
2 Pages
-
CONTINUOUS WEIGHING
2 Pages
-
CONTINUOUS DOSING
2 Pages
-
i 20 Weight indicator
2 Pages
-
D 20 Remote weight display
2 Pages
-
MP: Weighing structure
2 Pages
-
CKW Checkweigher
2 Pages
-
TVN tension load cell
2 Pages
-
Jet?FP P Pallet scale
2 Pages
-
MCW Crane scales
2 Pages
-
Load cells accessories
2 Pages
Archived catalogs
-
Weight indicator I 300
2 Pages