Housing & Stainless steel housing. & Adjustable wall, column or table fixing kit delivered as standard equipment. I 200 B Ex : 7-key leak-tight touch sensitive keyboard General presentation The I 200 Ex indicator is adapted for weighing installations in hazardous areas. It complies with the ATEX 94/9/CE directive and may be installed in hazardous areas for risks related to the presence of dust (zone 20, 21 or 22) or gas (zone 1 or 2). The I 200 Ex indicator power supply may be different depending on your installation and operation constraints : & Power supply with intrinsic safety outside hazardous areas : ISIS 2 & An I200 Ex P1/P1-S power supply in hazardous areas. & A BATSI rechargeable battery for mobile weighing stations. The I 200 Ex indicators range is composed of two models : • I 200 B Ex (Counting, Preset tare,etc.) • I 200 M Ex (Simple weighing : reception, shipping, transport, etc. Counting with or without tolerance control, Formulation, Control + -, Animal weighing, Calculation, ...). Memorization of 10 preset tare values. As an option, I 200 Ex indicators are provided with a data storage device in which all weighings made can be recorded, thus avoiding the addition of a control printer (tally roll printer). Off. On. Other accessible functions defined by configuration. Tare, zero or combined tare/zero defined by configuration. Print command. Select operating mode : simple weighing, counting, preset tare. Configurable function bar (your most frequently used function). Display screen backlit by red LEDs Character height : 25.4 mm I 200 M Ex : 21-key leak-tight touch sensitive keyboard The I 200 Ex indicator is all 304 L STAINLESS STEEL and is specially designed for severe industrial environments. It is protected according to IP 66* rate (dus tight and resistant to water jets), and this model is ideal for satisfying hygiene and cleanliness requirements of the agronomic-food processing industry, and Chemicals and Pharmaceutical industries. Metrological approval & Test certificate issued by a notified body in accordance with the Directive 90/384/EEC relating to non automatic weighing instruments. ATEX certification & Marking : EEx ia II B/C T4 II 1 G/D II C T4 if only one measurement channel and P1, P1-S or ISIS 2 power supply and no serial link. II B T4 if other configurations : double channel, DSD storage, serial link, battery power supply. European conformity & Directive 89/336/CEE relating to ElectroMagnetic Compatibility & Directive 2006/95/CEE relating to Low Voltage equipment & Directive 94/9/CEE relating to instruments and protection systems designed for use in hazardous areas. Off. On. Other accessible functions defined by configuration. Tare, zero or combined tare/zero defined by configuration. Print command. Numeric keypad with decimal point and error correction. Multifunction keys for defining settings for the weighing function and weighing control. 8. Configurable function bar (your most frequently used function). Use is based on the 3 multi-function keys and a complete display screen capable of simultaneously displaying all current weighing information and also all combined information about previous weighings. • Metrological information about the current weighing. • Calculated information about the current weighing. • Accumulated control information about batch weighings. Operation The I 200 EX indicator may be equipped with the following optional outputs in the factory : & measurement (double channel indicator), & serial link to peripheral outside hazardous areas : passive current loop connection to ISIS 2 intrinsic safety interface. & Serial link to D200 Ex slave display in hazardous areas : passive current loop. * Connections according to IP 67 rate. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / // / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

Technical characteristics Physical characteristics File characteristics Data storage (DSD) in option : Stored data : DSD No., gross , tare, net weight, preset tare, printed weight type, weight type transmitted by protocol, unit, identification number. Standard contents of the delivery & I 200 Ex indicator equipped with a measurement accessory. & Adjustable fixing kit (wall or table mounting). & User’s manual. Power supplies The ISIS 2 intrinsic safety power supply & BATSI battery power supply (option) The ISIS 2 intrinsic safety interface performs 2 functions : • Power supply interface with intrinsic...