SCL 35 /55 t Compression load cell 02/2008 Description The measurement principle used in the SCL load cell is based on the deformation of beams to which a compression force is applied. It uses strain gauges arranged to form a Wheatstone bridge for conversion of the force to an electrical signal. The SCL load cell is specially designed to be insensitive to excentrical loads while remaining compact. Applications Weighbridges. Weighing of tanks, silos, etc... Available models General The SCL load cell is a compression load cell using single column technology, and is particularly suitable for weighing applications on weighbridges. The SCL load cell is made of stainless steel and is compact, and is sealed under prolonged immersion (IP 68). Options Ex version for use in explosive and according to new directive 94/09/ CE. Test certificate issued by a notified body in accordance with OIML recommendation R60. SCL 55t Ex : 1000 d - C1 SCL 55t Ex : 3500 d - C3.5 SCL 55t Ex : 5000 d - C5 SCL 55t Ex : 7000 d - C7

Technical data Dimensions : Metrological characteristics Accuracy class* Maximum range (Emax) Minimum usage range % Emax (Emin) * The accuracy class option MB are conform with international recommendation OIML R60, for multi-range applications. Combined error* Temperature effect on sensitivity Effect of temperature on the signal at minimum dead load. LOAD CELL Fidelity error α : Angle d’inclinaison maximum autorisé : Return of the output signal at minimum dead load. Dimensions in mm and tolerances according to ISO 2768 m, medium accuracy. * The effect of temperature on the sensitivity and the...