Technical data Handle elongation for 2W / 3W ball valve PVC-U / PVC-C / PP / PVDF General:  Material:  up to max. 1 m pipe-length possible Range of application:  2W KH PVC-U / PVC-C / PP / PVDF  3W KH PVC-U / PP / PVDF  simple assembling cement the handle- and shaft-adaptor with a metic pipe d25/PN16 (max. length 1m)  markings on the handle- and shaftadaptor assist to align adaptors to ball valve  subsequent mounting in already existing installation is possible  arrows on the handle-adaptor show the flow position of ball valve when you remount the handle  for stabilisation the handle-adaptor can be fixed by a pipe clip  can be used for all kind of 2 way and 3 way ball valve This document does not constitute a guarantee, it is for initial information purposes only. The product range is continually upgraded, the designs and types therefore only reflect the state of the art at the time of printing. Subject to technical modifications! © Praher Plastics Austria GmbH DB/EN/DEEN/14/04/336 Subject to technical mod

Technical data Handle elongation for 2W / 3W ball valve PVC-U / PVC-C / PP / PVDF Dimensions: Dimensions for ball valve S4 10 Dimensions for 3 way ball valve Attention: in case of handle-alongation exact positioning of ball is not given as with 3 way ball valve hand operated Dimensions for ball valve S6 / M1 DN © Praher Plastics Austria GmbH DB/EN/DEEN/14/04/336 Subject t

Technical data Handle elongation for 2W / 3W ball valve PVC-U / PVC-C / PP / PVDF Exploded drawing: cap for screw screw handle handle-adapter pipe shaft-adaptor ball valve 1. check required length of pipe between handle- and shaft-adaptor 2. the pipe d25/PN16 have to be cutted off tot he required length 3. in assistance with the marks on the handle- and shaft-adaotir you have to cement both adaptors and pipe in alignment to ball valve 4. the solvent cement must dry 5. this prolongation (handle- and shaft-adaptor with pipe) have to be Remounting instruction: 1. remove the handle from the prolongation...