2 way ball valve M1
10Pages

Technical Data 2 way ball valve M1 with pneumatic actuator General: • • • • Body material: Seal material: Ball seating joint: Dimensions: Connector types: PP • Fusion socket • Fusion spigot • Threaded socket • PE fusion spigot • PE fusion socket • Backing flange (Backing flange ANSI on request) PVDF • Fusion socket • Fusion spigot • Threaded socket • Backing flange DIN / ANSI on request Operating pressure: • • Ball valve • Silicone free • Union with buttress thread • Double axial gasket • Floating ball • Double sided blocked ball • Adjustable ball seating joint • Integrated bottom mounting stand • Radial installation or removal • Maintenance free Actuator • Technical details on page 6 This document does not constitute a guarantee, it is for initial information purposes only. The product range is continually upgraded, the designs and types therefore only reflect the state of the art at the time of printing. Subject to technical modifications! Accessories: • Limit switch • Solenoid valve • Clamping / spacing element © Praher Plastics Austria GmbH DB/EN/DEEN/1

Technical Data 2 way ball valve M1 with pneumatic actuator Dimensions: PP Connector types PP fusion socket / fusion spigot (SDR11) / threaded socket / backing flange DIN(PN10/16) PE fusion socket / fusion spigot (SDR11 / SDR 17 on request) 10 16 F04 I DIN R DIN b DIN I ANSI R ANSI b ANSI threaded socket fusion socket fusion spigot fusion socket PE fusion spigot PE backing flange Backing flange ANSI on request © Praher Plastics Austria GmbH DB/EN/DEEN/14/03/368 Subject to change without prior notice!!

Technical Data 2 way ball valve M1 with pneumatic actuator DN d threaded socket Backing flange versions on request © Praher Plastics Austria GmbH DB/EN/DEEN/14/03/368 Subject to change without prior notice!! PVDF Connector types (*) PVDF fusion socket / fusion spigot (SDR21) / thr

Technical Data 2 way ball valve M1 with pneumatic actuator DN d ISO Flange Actuator Diagrams: Flow characteristic Opening angle (%) Cv value table Pressure loss © Praher Plastics Austria GmbH DB/EN/DEEN/14/03/368 Subject to change without prior notice!! Pressure loss diagram

Technical Data 2 way ball valve M1 with pneumatic actuator Torque Exploded drawing: © Praher Plastics Austria GmbH DB/EN/DEEN/14/03/368 Subject to change without prior notice!! 01. ball valve 02. bracket (material: PA-GF) 03. screw 04. hexagon socket screw 05. toothed washer 06. coupling - actuator (material: PA-GF) 07. actuator

Technical Data 2 way ball valve M1 with pneumatic actuator Bottom mounting stand – mounting possibilities: • Assembly rail Masonry / Concrete o Hanger screw and dowel required Further mounting possibilities with clamping/spacing element – see page 9. Technical features pneumatic actuator Description actuator piston actuation with two opposed pistons, power transmission with tooth rack, seal elastic Material actuator • Body: aluminium anodized • End caps: aluminium epoxy powder • Screws and nuts: stainless steel -20°C to +80°C Control fluid Filtered air according to PNEUROP/ISO class 4...

Technical Data 2 way ball valve M1 with pneumatic actuator AIR CONSUMPTION (FULL CYCLE) DA DOUBLE ACTING actuator AIR CONSUMPTION (FULL CYCLE) SR SPRING RETURN actuator Bracket (material : PA-GF) Coupling shaft Screw Hexagon socket screw Toothed washer Half-shells (material: ABS) Limit switch Pin Screw Locking screw for adjusting position feedback 26. Cover © Praher Plastics Austria GmbH DB/DEEN/15/12/368 Subject to change without prior notice! Position feedback (bottom mounted) - Mounted on adapter set -

Technical Data 2 way ball valve M1 with pneumatic actuator Technical data position feedback: Type Voltage max. Current max. Protection limit switch Protection DIN-plug Ambient temperature Limit switch mechanical (Ag-Ni) NO/NC* 15-250V AC (15-30V DC) 100mA-5A Electrical wiring Inductive position feedback: on request Limit switch box (top mounted) - Mounted on actuator General: Limit switch box with two mechanical switches Protection IP65 Cable gland M20*1,5 Body: black polycarbonate Cover: clear polycarbonate Mounting bracket + screw: stainless steel Seals: EPDM © Praher Plastics Austria...

Technical Data 2 way ball valve M1 with pneumatic actuator Solenoid Valve General: - Solenoid valve NAMUR with combined 5/2- and 3/2- ways function + standard coil Easy switch from 5/2- to 3/2-ways by turning around the sealing-plate Manual override as standard Body: aluminium anodized Piston: aluminium Seals: NBR Screws and spring: stainless steel Clamping / spacing element: Technical features: • Using for fixing as: o Clamping element floors, walls, ceilings plate o Spacing element (screws additionally necessary) for flange connection Bore for threaded bush Bore for threaded bush © Praher...

Technical Data 2 way ball valve M1 with pneumatic actuator Dimensions: Use as spacing element © Praher Plastics Austria GmbH DB/DEEN/15/12/368 Subject to change without prior notice!