Hydraulic Shears C2006CNC
13Pages

Last generation CNC vertical cut guillotines Nargesa, C2006 and C3006 are manufactured with welded and stabilized steel that allows to stand big efforts without any kind of distortion. REQUEST QUOTATION Please fill up the following form. We will contact you in less than 24 hours. Working days. REQUEST ADJUSTED QUOTATION VIDEO MACHINE OPERATION SOME OF OUR REMARKABLE CUSTOMERS Machine performance video.

Maximum cutting length: 2030 mm. Maximum thickness in steel: 6 mm. Maximum thickness in Stainless Steel: 4 mm. Maximum cutting length: 3055 mm. Maximum thickness in steel: 6 mm. Maximum thickness in Stainless Steel: 4 mm.

The last generation of NEW CNC vertical cutting Shears C3006, allows to cut any type of metal in a clean and accurate way. Vertical cut shearing is a lot more precise and with its consequent lower energetic expense and cost of the blades. The main advantages of the vertical cut in comparison to the swing cut are: Energetic saving Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving. Cutting quality Clean, perfect and accurate cut. Life of the blades The blades wear is almost nil. The life of the blades is 4 times higher than other shearing...

TECHNICAL FEATURES The C2006 CNC Shear is supplied as standard with the following components: High resistance structure > One block bench, mechanized, equipped with spheres to ease up the movement of the sheet. > Initial support machined to square of 1000mm with millimeter scale. > Two 1000mm millimeter stand arms. > LASER lightning on the cutting line. > LED front lightning. > Cutting of narrow strips without distortion. > 4-cutting edged upper and lower blades, with 90º angle, long lasting and the proper ones for cutting of steel. > Driving with safety pedal and emergency stop. > Back...

Rear stop The back gauge, fixed to the machine’s beam or ram, accompanies the material during the cutting process. The back gauge places quickly and accurately on the required position (± 0.1 mm). The addition of the CNC eliminates the continuous regulations and allows maintenance to be reduced to a minimum level. Ramp of material extraction This metallic ramp located in the lower part of the cutting zone allows the material to slide down to the extraction area. Hydraulic circuit Fully optimized with high quality and reliability components. It manages the pressure of the pressing cylinders...

Front supports The front supports are blocks fixed and machined to the monoblock of the bench. They are equipped with millimeter scales and the initial support has got a lateral gauge with a cutting start square. Table The bench is manufactured in a mechanized single-block and it is a part of the structure. It was dimensioned and optimized by simulation of finite element analysis. Some sliding spheres fixed to the table decrease the friction of the material and contribute to its sliding, facilitating the load to the operator. Polycarbonate front protection These protection screens let the...

The operator only has to enter the type of material, thickness, distance from the gauge and the CNC will automatically arrange all components to obtain an optimal result. > Equipped with a 7” touch screen makes all operations on the machine simpler and intuitive. > Can manage up 3 axes and 16+ 12 I/O with an integrated PLC. > Storage of thousands of part programs. > 7” colour touch screen resolution 800x480. > 128 MB Silicon Disk. > 2 analogue inputs, 12 bits resolution. > 16 digital inputs (24Vdc). > 16 digital outputs (24Vdc, 0,7A Max.) Protected against overload and short-circuits. > 1...

DETAILED FEATURES C2006 3-Phased tension Hydraulic Pump Container capacity Fix cut inclination Hydraulic rammers Goose neck Accuracy and repeatabilit Dimensions Weight 400/240 V. 50/60 Hz 16 liters 73 liters 1,75º 10 units 190 mm +/- 0,1 mm 2880x2360x1790 mm 5100 Kg C3006 3-Phased tension Hydraulic Pump Container capacity Fix cut inclination Hydraulic rammers Goose neck Accuracy and repeatability Dimensions Weight 400/240 V. 50/60 Hz 22 liters 96 liters 1,75º 15 units 173 mm +/- 0,1 mm 3880x2460x1820 mm 7500 Kg Cutting length Motor power Maximum thickness in Steel (450N/mm2) Maximum...

EXTERNAL DIMENSIONS • Tariff Item Code: 84623300 • The machine is delivered completely assembled. • Packing with retractile film. • Optional: Complete wooden packing NIMF15. Nett weight Gross weight

OPTIONAL ACCESSORIES Sheet metal back support C2006 CNC The C2006 CNC sheet metal back support is a holder to prevent sheet metal bending, thus ensuring that it has good contact with the stop. It is equipped with 49 wheels placed in 7 rows at different distances. These are specifically distributed to provide optimum support on sheets of different sizes. The support also offers two options to take the material off. In the first choice, when it has performed the support function, it descends and tilts to be able to extract the sheet metal from the rear of the machine. In the second option,...

+info IRON WORKERS +info SECTION BENDING MACHINES +info NON-MANDREL PIPE BENDER +info HORIZONTAL PRESS BRAKES +info TWISTING/SCROLL BENDING MACHINES +info HYDRAULIC PRESS BRAKES +info HYDRAULIC SHEAR MACHINES +info IRON EMBOSSING MACHINES +info BROACHING MACHINES POWER HAMMERS END WROUGHT IRON MACHINES +info PRESSES FOR LOCKS

Nargesa machines have 3 years warranty provided that the customer registers it in our website. Otherwise it would be only one year warranty. This one encloses any manufacturing default all along these 3 years for components. Any misuse is excluded from this condition. Labor, back and forth shipping and any eventual repair, are not included in this warranty. Partner companies Nargesa will arrange transport up to final destination, whenever the customers asks for so. There is also the possibility for the customer to arrange the shipment himself with his own agency. SHIPMENT EVERYWHERE...