Gas forge H2
13Pages

PROPANE FORGING FURNACE

PROPANE FORGING FURNACE Forging Furnaces Nargesa are used in blacksmiths workshops for ornamental forge, moulding iron up to achieving the desired shapes. REQUEST QUOTATION Please fill up the following form. We will contact you in less than 24 hours. Working days REQUEST ADJUSTED QUOTATION VIDEO MACHINE OPERATION SOME OF OUR REMARKABLE CUSTOMERS Machine performance video

If you’re looking for a clean, safe flame which makes you turn steel into its red hot point so you can shape it, the Propane Furnace Nargesa is the one. It will be for sure your best choice! Knives Swords Axes Forging decoration All sort of designs for artistic forging Iron garden furniture Wrought iron chairs and tables It is a good substitute for the old Forge, much cleaner, faster and more efficient

PROPANE FORGING FURNACES NEW Propane forging furnaces Nargesa are equipped with one, two or three burners to heat the iron and work it: moulding, bending, piercing, welding, tempering, forging, shoeing horses... SAFER It has got new security systems for the operator. Fulfilling the regulation RD919/2006. Certified by the Technological Center APPLUS, General Laboratory for Testing and Investigation. MORE EFFICIENT Consume up to 75% less gas and reach a higher temperature than any oven in its category. More than 1300ºC. RESPECTFUL WITH THE ENVIRONMENT Emissions below 0.002% of CO. Internal...

SAFETY OF THE OPERATOR The safety of the operator is one of the main premises when designing all Nargesa machines. The H2 forging furnace has got all the necessary safety devices for the well-being of the operator that will handle it and it is according to the Regulation of appliances that use gas as fuel RD919 / 2006. Automatic electronic ignition Prevents the operator from inserting his hands in the combustion chamber to turn on the gas. No tool is necessary to generate the spark. Gas system integrated in the oven structure The components were totally protected from impacts that could...

TECHNICAL FEATURES All burners can operate independently A vermiculite separator is supplied with the Oven to reduce the size of the combustion chamber and thus the heat is not dispersed. Double insulation of compacted vermiculite, to avoid heat loss. Insulating flange in the material inlets to keep the heat inside the combustion chamber. Integrated bar support and adjustable to the different lengths of material Its shape prevents the material from sliding laterally. Possibility to place the material support in any of the three entries. Painting The furnace is covered with heat painting to...

All components are standard and easy to find in any warehouse or hardware store Air flow regulator To adjust this size to the different altitudes. Depending on the work place of the furnace and its altitude regarding the sea, the air flow for the mixture of gas and marine air will be regulated, the suitability for a good combustion. Needle flow regulation valves Allow the accurate regulation of gas flow. Gas hose made of stainless steel This characteristic prevent it from collapsing and burning. This hose does not expire, so it is not necessary to replace it. Precision pressure regulator...

To regulate the performance of Furnace H2 we have a control panel that enables us to keep the whole operation of the machine in a simple and intuitive way Gas valve The Control panel has got two valves for the opening of the gas entrance to the Burners. The operator controls them in order to obtain more on less gas flow. Electronic switching Is the one that activates the spark plug and generates the spark to light up the Burner. Thermocouple pushbutton Is the one that opens the valve the get the thermocouple activated. This valve opens the path to the Gas valves

DETAILED FEATURES H1 Fuel type Propane gas (GLP) Adjustable working pressure 0.1 - 1.5 bar External dimensions 310x450370 mm Size of combustion chamber 140x236x100 mm Weight 27 Kg H2 Fuel type Propane gas (GLP) Adjustable working pressure 0.1 - 1.5 bar External dimensions 500x440x370 mm Size of combustion chamber 324x240x100 mm Weight 40 Kg H3 Fuel type Propane gas (GLP) Adjustable working pressure 0.1 - 1.5 bar External dimensions 510x580x370 mm Size of combustion chamber 464x240x100 mm Weight 53 Kg Maximum temperature Gas intake as 1 per bar x 1 burner x 2 burners x 3 burners

• Tariff Item Code: 84171000 • Gas furnace is delivered completely mounted. • Complete wooden packaging NIMF15. Nett weight Gross weight

+info IRON WORKERS +info SECTION BENDING +info NON-MANDREL PIPE +info HORIZONTAL PRESS +info TWISTING/SCROLL +info HYDRAULIC PRESS +info HYDRAULIC SHEAR +info IRON EMBOSSING +info BROACHING MACHINES BENDING MACHINES POWER HAMMERS END WROUGHT IRON MACHINES +info PRESSES FOR LOCKS

Nargesa machines have 3 years warranty provided that the customer registers it in our website. Otherwise it would be only one year warranty. This one encloses any manufacturing default all along these 3 years for components. Any misuse is excluded from this condition. Labor, back and forth shipping and any eventual repair, are not included in this warranty. Partner companies SHIPMENT EVERYWHERE TECHNICAL ASSISTANCE Follow us on PRADA NARGESA, S.L. Ctra. De Garrigàs a Sant Miquel s/n 17476 Palau de Santa Eulalia (Girona) Spain Tel. +34 972 568 085 www.nargesa.com nargesa@nargesa.com This...