PRAB DIAGONAL-SHAFT WRINGER PROVEN TO INCREASE SCRAP VALUE UP TO 25% Reclaim up to 98% of Valuable Coolant and Cutting Oils Cut your fluid costs and make your scrap worth more. PRAB’s heavy-duty wringers/centrifuges use more than 600G’s of force to reclaim up to 98% of the valuable coolant and cutting oils from aluminum, brass, cast iron, steel, stainless steel and other metal chips. This allows you to reclaim fluids for recycle and reuse, significantly reduce haul-away cost, and get more value from dry chips. Uses more than 600G’s of centrifugal force to remove fluid from chips. Removes up to 98% of moisture by volume from chips. Model CL-80 Centrifugal force created by rotating bowl, drives the chips and fluid up near the bowl liner. Fluids pass through the bar screen and are stored in tank for reuse. Discharge dry chips with gravity (CD) or air (AD) models. Reclaim valuable cutting fluids. “Over $212,000 a year in oil savings. I am in shock along with everyone else in my plant.” -Rod Anthony, President, Anthony Screw Products. Backed by the PRAB Difference Models are available in gravity discharge (left) or air discharge (

PRAB DIAGONAL-SHAFT WRINGER GET A HIGHER PAYBACK FROM YOUR SCRAP METAL PRAB 24CD Wringer System (chips discharged to outdoor silo) PRAB 24CD Wringer System (chips discharged to screw conveyor) PRAB 24AD Wringer System PRAB 24AD Wringer System (chips discharged to scrap cart) (chips discharged to outdoor silo) PRAB 24CD Crusher/Wringer System (chips discharged to screw conveyor) Contact us to request a quote today Phone: 1-800-968-7722 l Email: [email protected] l Website: prab.com

PRAB DIAGONAL-SHAFT WRINGER MINIMIZE MAINTENANCE & HAUL-AWAY COSTS Standard Components: 1. Access plate 2. Feed chute (abrasion resistant steel) 3. Impact Ring (manganese steel) 4. Bar screen (stainless steel) in 16”, 24” and 40” diameter with paddles (AD model) or without paddles (CD Model) 5. Bowl liner (easily replaceable) 6. Bowl (spun steel) 7. Inspection hatch 8. Heavy-duty bearings (standard, off-the-shelf) 9. Motor (standard, off-the-shelf) 10. Fluids discharge Note: Air discharge wringers can typically transfer finished chips up to 50 feet. Distances of up to 85 feet are possible depending...

Nominal Throughput (lbs/hr)* Illustration of chip and fluid flow using the gravity discharge model. *Throughput dependent on incoming bulk density **Stated throughput is without an integral separator (Model R) PRAB’s E-Series Chip System is a smaller self-contained system for lower volume applications. PRAB HHIH Contact a chip system product specialist today 5801 East N Avenue, Kalamazoo, MI 49048 Phone: 1-800-968-7722 l Email: [email protected] l Website: prab.com 1048-V5-20230119