HYDROCYCLONE COOLANT FILTRATION SYSTEM FILTERS UP TO 98% OF CONTAMINANTS WITHOUT FILTER MEDIA Dual Vortexes Separate Coolant from Solids Replacing filter media is time-consuming and expensive. The Hydrocyclone creates ascending and descending vortexes in a cylindrical feed that separates contaminants from coolant without the use of filter media. This design results in consistent, long-term filtration. Hydrocyclone Coolant Filtration System Benefits of Fluid Filtration with the PRAB Hydrocyclone: • • • • • • • • Separates up to 98% of contaminants from fluid No filter media to replace Reduces coolant replacement frequency Improves performance of grinding wheel Improves finish of workpiece Safe, effective and simple to operate Easy to maintain Improves tool life Water soluble machining coolant Filtration of ferrous and non-ferrous materials: o o o Carbon steel o Stainless steel o Chrome o Copper Aluminum Non-metallic materials such as glass and grinding wheel grit Backed by the PRAB Diff

PRAB HYDROCYCLONE REMOVES UP TO 98% OF CONTAMINANTS WITHOUT FILTER MEDIA HC Series Hydrocyclone Specifications Contaminated Water Flow Rate Clean Water Supply Flow Rate Ascending and descending vortexes are created using high pressure. Clean water drains through the ascending vortex while contaminants are precipitated by the descending vortex. Pressure at outlet: 0.2 kg/cm2 (2.8 psi) Max. Pressure 50/60HZ 200/220V Coolant Tank Capacity: Ranges from 170 to 650 L (45 to 172 gal)* Chip Collector Capacity: Ranges from 24 to 150 L (6 to 40 gal)* *Not all Coolant Tank and Chip Collector sizes are available...