3104
2Pages

Isolated converter - Isolation 2.5 mm2 and conversion of standard DC signals - Power supply and signal isolator for 2-wire transmitter - DIP-switch configured • Isolation and conversion of standard DC signals. • Galvanic separation of analog current and voltage signals. • Elimination of ground loops and measurement of floating • A competitive choice in terms of both price and technology for galvanic isolation of current and voltage signals to SCADA • Installation in ATEX Ex zone 2 / lECEx zone 2 / FM division 2. • Suitable for environments with high vibration stress, e.g. Technical characteristics • Easy configuration via DIP-switches. • The input is protected against overvoltage and polarity error. • Factory-calibrated measurement ranges. • Inputs and outputs are floating and galvanically separated. input input input Voltage Current output output This page is automatically generated on the basis of information provided on vvww.prelectronics.com and affiliated websites. It is provided to you as a service and for information purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability

Output specifications -25°C to +70°C -40°C to +85°C 20...28°C < 95% RH (non-cond.) IP20 Pollution degree 2 & measurement / overvoltage category II 16.8...31.2 VDC 1.2 W 0.4 W (typ.) / 0.65 W (max.) 2.5 kVAC 300 VAC / 250 VAC (I.S.) > 60 dB < 7 ms < ±0.05% of span < ±0.01% of span / °C < ±0.5% of span