3103
2Pages

Catalog excerpts

Isolated repeater - Isolation and 1:1 conversion of standard current signals Simple - no setup needed • Isolation and 1:1 conversion of standard current signals. • Galvanic separation of analog current signals. • Elimination of ground loops and measurement of floating • A competitive choice in terms of both price and technology for galvanic isolation of current signals to SCADA systems or • Installation in ATEX Ex zone 2 / lECEx Zone 2 / FM division • Suitable for environments with high vibration stress, e.g. Technical characteristics • The input is protected against overvoltage and polarity error. • Factory-calibrated measurement ranges. • Inputs and outputs are floating and galvanically separated. Current Current This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability

Open the catalog to page 1

Output specifications -25°C to +70°C -40°C to +85°C 20...28°C < 95% RH (non-cond.) IP20 Pollution degree 2 & measurement / overvoltage category II 16.8...31.2 VDC 0.8 W 0.4 W (typ.) / 0.65 W (max.) 2.5 kVAC 300 VAC / 250 VAC (I.S.) > 60 dB < 7 ms < ±0.05% of span < ±0.01% of span / °C < ±0.5% of span < ±1% of span

Open the catalog to page 2