Overview
The Waste Water Pump is designed to efficiently pump water levels down to 1mm, with a flow rate of up to 170 litres per minute and a maximum head of 11 meters. It is suitable for submersion up to 20 meters and is rated IP 68 for protection against dust and water.

Construction and Materials
The pump features a steel outer casing, a cast aluminium pump stand, and a rubber pump chamber. It is equipped with a urethane vortex impeller and a double mechanical seal in an oil bath, with primary and secondary seals made of silicon carbide and ceramic on carbon, respectively. The motor frame is constructed from aluminium diecasting, and the shaft is made from SUS403 (EN-X6Cr13).

Specifications
- Part Numbers: PS20042 – 110v / PS20062 – 230v
- Weight: 12kg (dry weight without cable)
- Discharge Connection: 1” (25mm)
- Electric Motor: Dry-type submersible induction motor, Insulation class E, 2 poles, 2850 r.p.m, capacitor start
- Voltage: 110V/240V, 50Hz, 1-phase or 2-phase
- Power Input: 0.59kW, Power Output: 0.48kW
- Nominal Current: 6.2A (110V), Start Current: 14.2A (110V)

Contact Information
Professional Protection Systems Ltd, Protection House, Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8HX
Phone: +44 (0)1908 272240
Email: [email protected]
Website: www.ppsgb.com
Social Media: @PPSGB

Note
PPS reserves the right to change, modify, or discontinue any product listed. Images may differ slightly from actual products.