Product Data Sheet Rapid Rescue Tent 600 Overview The Rapid Rescue Tent is lightweight shelter that may easily be deployed with a minimum of logistic support and within the shortest possible time. The lightweight design makes the Rapid Rescue Tent especially suitable for rapid response units and groups that need to maintain a high mobility. Inflatable tent with six arches integrated floor, and two zipped doors Interconnection door-door lengthwise The tent consists of: 1 ea main tent, 1 connector. Specification Dimensions High pressure tube with valve, diameter 4”. Longitudinal tubes for outstretching ground sheet High pressure tube with valve, diameter 3”. Tent fabric, outer cover PVC-coated polyester, 550 g/m². Colour: white. Ground sheet PVC-coated polyester, 740 g/m². Anti-slip. Colour: grey Size: 1,40 x 0,55 m (5 ea along each sidewall) PVC-glass, mosquito and roll-up curtain inside and outside Size: minimum 1,10 x 2,10 m (one at each end) with replaceable zippers Weight Transport cover with tent Transport bag with pegs Transp. bag w/spacer poles Total weight Sledgehammer is included. Repair set is included. Weight without transport pallet. Transport cover with tent, transport bag with pegs and hammer, transport bag with spacer poles and repair set. Accessories included Pegs Ropes for tent Length 500 mm, galvanized steel Ø 8 x 2,75 m with ring and stay tightener Ø8 x 2,75m + 2,75m w/ring and stay tightener. Y-type Spacer poles, fibre glass Piece of tent fabric PVC-coated polyester Piece of ground sheet fabric PVC-coated polyester SR-lock, replacement part Specification may be altered without notice due to progressive product development. Versar PPS reserves the right to change, modify or discontinue any product listed. Images may be slightly different than actual products. Protection House, Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8HX, Phone: (+44) 01908 272240 L0017