Product Data Sheet Rapid Rescue Tent 500 Overview The Rapid Rescue Tent is lightweight shelter that may easily be deployed with a minimum of logistic support and within the shortest possible time. The lightweight design makes the Rapid Rescue Tent especially suitable for rapid response units and groups that need to maintain a high mobility. Inflatable tent with six arches Integrated floor, and two zipped doors Interconnection door-door, or gable-gable lengthwise The tent consists of: 1 ea main tent, 1 ea entrance section, 1 ea entrance section, 1 connector. Specification Dimensions Total length 9,5 m incl entrance sections Total Width 5.1 m High pressure tube with valve, diameter 4”. Tent fabric, outer cover One side special-coated, water repellent and fungicide finish, oil- and dirt repellent finish, > 1000 mm water column, 300 g/m², colour: sand Ground sheet PVC-coated polyester, 600 g/m², colour: grey Size: 1,40 x 0,55 m (3 ea along each sidewall) PVC-glass, mosquito and roll-up curtain outside Weight Transport cover with tent Transport bag with pegs Transport bag w/spacer poles Total weight Transport cover with tent, transport bag with pegs and hammer, transport bag with spacer poles and repair set. Length 500 mm, galvanized steel Ø 8 x 2,75 m with ring and stay tighter Ø8 x 2,75m + 2,75m w/ring and stay tighter. Y-type Sledgehammer is included. Repair set is included. Weight without transport pallet. Accessories included Pegs Ropes for tent Sledgehammer Spacer poles, fibre glass Piece of tent fabric Special-coated polyester Piece of ground sheet fabric PVC-coated polyester SR-lock, replacement part Versar PPS reserves the right to change, modify or discontinue any product listed. Images may be slightly different than actual products. Protection House, Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8HX, Phone: (+44) 01908 272240 L0016