PPS Product Data Sheet Air-Fed Chemical Suit L0035-010312 Proflair Multi Use The Proflair Multi Use air-fed chemical suit is a one-piece re-usable air-fed suit designed for all industries where protection is required from exposure to chemicals and particulates. The air hose delivers air to the suit through a tail sealed by a bung and external clamp. The air line is supported within the suit by a belt worn internally, fitted with an audible low flow warning device. The air flow is distributed in the suit through a series of channels to the head and limbs giving a cooling diffused air flow around the users head and body. Users enjoy the protection of a suit (APF 200) without the need for mask fitting, giving free head movement and wide vision. Features: Unique high strength, high frequency welded seams with flat profile Excellent all round vision through a high quality optically clear visor Optimised for active use giving freedom of movement and wide visibility Air distribution channels provide increased comfort and reduced wearer stress Emergency breather options available for safe egress in the vent of air flow failure Hoses with additional reinforcement and built in communications connections available Fall arrest harness and hard wire communication entry port options. See overleaf for specifications and options Page 1 of 2

Proflair Multi Use Specification: Materials Natural PVC, PVC Wavelock, PVC Duraskin, Polyurethane and Hypalon Sizes Standard sizes Small, Medium, Large, X-Large, XX-Large. Special sizes available Cuff Waist Standard rigid cuff or range of other cuff options available Integral sock and outer boot flap, welded boot, clamped boot or double elasticated Attached to air belt with waist loops Zip Normal or airtight zip, with front or rear entry options Leg Minimum 311 l/min Flow Rates Maximum 425 l/min Certification CE marked and certified to relevant parts of EN 943-1, Type 2, Ventilated Type Type:...