Catalogs >
PPSGB >
ISO-Capsule

ISO-Capsule
1Pages

Catalog excerpts

The ISO-Capsule is designed for temporary isolation of a person through to be contaminated by infectious diseases or biological or chemical incidents, while transporting/transferring them to hospital or an ICU (infection control unit) The ISO-Capsule incorporates a combination of HEPA/Organic vapour air filters and a PAPR (powered Air Purifying Respirator), creating a negative pressure environment. As a result, a contaminated patient can be confidently transported with a significantly reduced risk of contaminating: - The first responder, medical staff or transportation vehicles - The surrounding environment Upper section manufactured from optically correct, UV stabilised super clear PVC Fully insulated base with heat reflective material encapsulated between reinforced PVC Eight pockets retaining easily replaceable PPS glove system, allowing multiple entry points to your patient Poly ribs provide support for the upper section Belt system with 4 handgrips on each side enables first responders to transport and safely manoeuvre patient is ISO-Capsule. The handgrips can be used as attachment point to secure the unit whle in transit 5 points harness to secure the patient within IV access ports at either end of the unit IV port at the foot of the unit can be used to drain fluids Attached pass thru bag, allowing items to be placed into or removed from the unit, with minimal pressure loss in unit Integral pocket to slide body board through to support to support patient during transport Central push/pull connections for oxygen and intravenous connections or other fluids Negative pressure filtration system removes airborne particulates through filtration on inlet to ISO-Capsule and contaminated air is then drawn out of the chamber via the PAPR unit and passes through HEPA filters before being echausted into the atmosphere Vision panels Protection at user interface IV ports Posting bag_ Full length Nitrile gloves 8 access points PAPR unit - Negative pressure filtration unit (180 litres per minute). Creating minimum of 12+ air exchanges per hour 2 HEPA/ULPA/2 ABE Canisters Rechargeable volt, NiMH - 8hr batter & charger Internal patient securing system Maximum weight capacity Weight Dimensions (LxWxH) Weight packed (complete system) Storage size *PPS reserves the right to change, modify or discontinue any product listed. Images may be slightly different than actual products.

Open the catalog to page 1

ISO-Capsule 1Pages

Catalog excerpts

All PPSGB catalogs and technical brochures

ISO-Capsule
1Pages