Catalogs >
Powersolve Electronics >
TRACO TES1 Series

TRACO TES1 Series
4Pages

Catalog excerpts

DC/DC ConvertersTES 1 Series, 1 Watt Features With their small footprint these IWatt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. ♦ Small SMD package with standard footprint ♦ I/O isolation 1500 VDC ♦ Single and dual output models ♦ Input voltage 5, 12 and 24 VDC ♦ High efficiency up to 80% ♦ Operating temperature range -40°C to +90°C ♦ High accuracy of pin co-planarity ♦ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020C ♦ Available in tape and reel package ♦ 3-year product warranty

Open the catalog to page 1

DC/DC Converters TES 1 Series Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection Input filter internal capacitors Output Specifications Voltage set accuracy – 5 VDC models: ±2 % at 60 % load – other models: ±2 % at 100 % load Voltage balance (dual output models, balanced load) 1.2 % / 1 % change Vin see graphs below – Input variation – Load variation Ripple and noise (20 MHz Bandwidth)...

Open the catalog to page 2

DC/DC ConvertersTES 1 Series 1 Watt Physical Specifications Casing material Lead-free reflow solder process Moisture sensivity level (MSL) Washing process Packaging plastic (UL94V-0 rated) single output models: 1.7 g (0.06oz) dual output models: 2.0 g (0.08oz) as per J-STD-020D.1 (to find at: www.jedec.org - free registration equired) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) www.tracopower.com/products/smd-wash.pdf www.tracopower.com/products/tes1-pack.pdf Application note: www.tracopower.com/products/tes1 -application.pdf Outline and...

Open the catalog to page 3

DC/DC ConvertersTES 1 Series 1 Watt Outline and Solder Pad DimensionsTES 1 Dual Output Models Pin-Out * Pin to be isolated from circuitry Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.10 (±0.004) Other tolerances: ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com http://www.powersolve.co.uk ev. April 13. 2015

Open the catalog to page 4

TRACO TES1 Series 4Pages

Catalog excerpts

All Powersolve Electronics catalogs and technical brochures

TRACO TES1 Series
4Pages