*mydirectindustry

Catalogs
Powersolve Electronics
PSO100-PSU100 Series

PSO100-PSU100 Series

Product catalog summary

Overview: The document provides technical specifications for the PSO100/PSU100 Series AC-DC converters by Powersolve Electronics Ltd. These converters offer single outputs up to 100 Watts and are available in both open PCB and aluminium U channel versions.

Key Features:

Power Factor Correction with a minimum of 0.95.
Wide universal input voltage range from 90-264VAC.
Single DC output with any voltage available from 3-50V DC.
Industry-standard 5 x 3” footprint.
Full safety approvals and EMC compliance with FCC Part 15 Class B & CISPR-22 Class B.

Electrical Specifications:

AC Input: 90-264VAC, 47-63Hz.
Input Current: Maximum 2A at low line, full load.
Inrush Current: Maximum 30A at cold start, 230VAC input.
Efficiency: Typically 80%.
Line Regulation: Typically 0.5%, maximum 1%.
Over Voltage Protection: 112-132% of nominal voltage.
Over Current Protection: 110-150% of nominal output power.
Operating Temperature: 0 to 70ºC, with derating from 50ºC.
Storage Temperature: -40 to +85ºC.
Relative Humidity: Maximum 95% non-condensing.

Output Voltage & Current Ratings:

Models range from 3.3V to 48V with varying current ratings and maximum output power of up to 100 Watts.
Regulation varies from 2% to 5% depending on the model.

Mechanical Specifications:

PSU100 Series: Weight approximately 475g.
PSO100 Series: Weight approximately 345g.

Connectors:

Input and output connectors use Molex housings and crimp terminals.

Catalog excerpts

PSO100/PSU100 Series Single Outputs Up to 100 Watts Features • Power Factor Correction • Wide Universal Input Voltage of 90-264VAC • Single DC Output • Industry Standard 5 x 3” footprint • Available as Open PCB or in Aluminium U Channel • Full Safety Approvals • EMC to FCC Part 15 Class B & CISPR-22 Class B • Any DC output voltage available from 3-50V DC Electrical Specification AC Input Power Factor Correction Input Current 2A Max, Low Line, Full Load Inrush Current 30A Max, Cold Start, 230VAC Input Line Regulation Load Regulation Over Voltage Protection Over Current Protection 110-150% Nominal Output Power Transient Response 4mS, Full Load to 50% Load 16mS Min, 110V AC Input, Full Load Output Ripple & Noise Earth Leakage Current Operating Temperature 0 to 70ºC, Derate Linearly from 100% Load at 50ºC to 50% Load at 70ºC Storage Temperature Relative Humidity FCC Part 15 Class B, CISPR-22 Class B Safety Approvals Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

Open the catalog to page 1

AC-DC Converters Output Voltage & Current Ratings MODEL MODEL DC OUTPUT TOTAL MAXIMUM (OPEN PCB VERSION) (U CHANNEL VERSION) REGULATION OUTPUT POWER Note: Any output voltage version is available between 3V and 50V DC - consult the sales office for details. Mating Connectors: Input: Molex Housing 09-50-3031 Crimp Terminals: Molex 2478 Output: Molex Housing 09-50-3131 Crimp Terminals: Molex 2478 Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England

Open the catalog to page 2

Mechanical Specification - PSO100 Series 1. Dimensions are shown in inches or mm. Mechanical Specification - PSU100 Series 1. Dimensions are shown in inches or mm. Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England

Open the catalog to page 3

All Powersolve Electronics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list