PPS60 Series 60 Watts Single DC Output Features • Meets CEC Requirements Level VI • Universal AC Input • Conforms to RoHS • Interchangeable AC Plugs for UK, Europe, US & Australia • EMC to EN55022'B', CISPR22 ‘B' & FCC ‘B' • Full Safety Approvals • Compact enclosure Electrical Specification INPUT Input Voltage Input Frequency AC Input Current No Load Input Power Earth Leakage Current OUTPUT Output Voltage & Current Output Power Output Ripple & Noise Line Regulation Load Regulation Output Protection ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity GENERAL Efficiency MTBF SAFETY Withstand Voltage Insulation Resistance Safety Approvals EMI/EMC MECHANICAL Output Connector & cable 90-264VAC 47-63Hz 1.5A max 0.21W max <250uA See table 60 Watts 1% Max 1% max ±5% max Overcurrent, short circuit & over voltage 0 to 40°C, ambient -20°C to +70°C 5-95% max >88% conforms to DOE regulation level VI >40,000 hours @ 25°C calculated to MIL-HDBK-217F Primary to Secondary 3000VAC 500VDC 50Mohm between input or output plug to plastic case CB scheme, cTUVus, TUV GS EN60950-1 CISPR22 'B', FCC Part 15 'B', EN55022 ‘B' UL94V-1 plastic enclosure, dimensions 109 x 47 x 32mm, 2.5 x 5.5 x 11mm barrel connector as standard, others optional cable length 1.2 metres NOTE: (XX) in part number denotes output connector type. Standard stock items have 2.1 x 5.5 x 11mm centre positive barrel connector. Therefore part number would be PPS60-12-02. Other connectors are available which would be a different 2 digit number. Other output voltages available but may be subject to MOQ. AC Connectors: Stock items will be shipped with UK, EU, US & Australian connectors. Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]