Catalogs >
Powersolve Electronics >
PPS40LB Series

PPS40LB Series
3Pages

Catalog excerpts

AC-DC Converters www.powersolve.co.uk PPS40LB Series 40 Watts Single, Dual, Triple & Quad Outputs Features • Universal AC input • Built-in EMI filter • Low cost • Optional constant current change (for single output) Electrical Specification INPUT Input range Frequency Inrush current Efficiency EMI filter Line regulation OUTPUT Maximum power Peak power Hold-up time Overload protection Overvoltage protection Ripple/Noise Output adjust ENVIRONMENTAL Operating temperature Humidity Vibration Storage temperature Temperature coefficient MTBF demonstrated EMI & EMC Safety approval 90~264 VAC, universal 47~63Hz 30A typical, Cold start @ 25°C, 115 VAC 65% ~80% typical at full load FCC Class B conducted, CISPR 22 Class B conducted, EN55022 class B conducted ± 0.5% typical 40W convection 52 watts 10ms typical at full load and 115 VAC nominal line Short circuit protection Main output 20% to 40% above nominal output ± 1% Max. @ full load (Optional ±0.5% per inquiry) ± 10% output 1 0 to 5 ambient; derate each output at 2.5% per degree from 50°C to 70°C Operating; non-condensing, 5% to 95% 10~55 Hz at 1G 3 minutes period, 30 minutes along X, Y and Z axis -40 to 85 ± 0.05% per degree C >100,000 hours at full load and 25°C ambient conditions FCC part 15, Class B CISPR 22 / EN55022, Class B VCCI, Class 2 CE, EN 61000-3-2 (Class A) and –3; EN 61000-4-2, -3, -4, -5, -6 and -11 UL, cUL, TUV EN60950 Power Derating Curve 65W 40W Output Power 25W (Watts) 10W Natural Convection Cooling Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk

Open the catalog to page 1

AC-DC Converters www.powersolve.co.uk TOTAL REGULATION RIPPLE & NOISE Pk-Pk Note: MAX POWER: RIPPLE & NOISE: LOAD REGULATION: 40 Watts convection cooled, 52 Watts peak for <30 seconds with a maximum 10% duty cycle. Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth, input at nominal line voltage, 0.1uF and 47uF capacitor on outputs. Load test conditions are from minimum, 50% and 100% load conditions on each output. *Minimum loading of 10% required on all outputs of multi output units, to achieve regulation specified. Powersolve Electronics Ltd. Units...

Open the catalog to page 2

BOTTOM VIEW 5P/9.5mm Pitch Terminal Block (Single Output) '(Multiple Output) 7P/8.25mm Pitch Terminal Block Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England

Open the catalog to page 3

PPS40LB Series 3Pages

Catalog excerpts

All Powersolve Electronics catalogs and technical brochures

PPS40LB Series
3Pages