AC-DC Converters www.powersolve.co.uk PPS40 Series 30/40 Watts Single, Dual & Triple Outputs Features • Universal AC input • Built-in EMI filter • Optional 12V, 24V or 48V DC input (Consult sales office for details) Electrical Specification INPUT Input range Frequency Inrush current Efficiency EMI filter Line regulation OUTPUT Maximum power Peak power Hold-up time Overload protection Overvoltage protection Ripple/Noise Output adjust ENVIRONMENTAL Operating temperature Humidity Vibration Storage temperature Temperature coefficient MTBF demonstrated EMI & EMC Safety approval 90~264 VAC, universal 47~63Hz 25A typical, Cold start @ 25°C, 115 VAC 65% ~80% typical at full load FCC Class B conducted, CISPR 22 Class B conducted, EN55022 class B conducted ± 0.5% typical 40W with 15 CFM forced air cooling, 30W convection (See derating curve for convection cooling) 50 Watts 10ms typical at full load and 115 VAC nominal line Short circuit protection Main output 20% to 40% above nominal output ± 1% Max. @ full load ± 10% main output 0 to 50°C ambient; derate each output at 2.5% per degree from 50°C to 70°C Operating; non-condensing, 5% to 95% 10~55 Hz at 1G 3 minutes period, 30 minutes along X, Y and Z axis -40 to 85°C ± 0.05% per degree C >100,000 hours at full load and 25°C ambient conditions FCC part 15, Class B CISPR 22 / EN55022, Class B VCCI, Class 2 CE, EN 61000-3-2 (Class A) and –3; EN 61000-4-2, -3, -4, -5, -6 and -11 UL, cUL, TUV EN60950 Power Derating Curve 40W 15 CFM Forced Air Cooling Output Power (Watts) Natural Convection Cooling Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

AC-DC Converters www.powersolve.co.uk TOTAL REGULATION RIPPLE & NOISE Pk-Pk Note: CONVECTION COOLING: PEAK POWER: RIPPLE & NOISE: LOAD REGULATION: Current ratings in ( ) are maximum continuous output with convection cooling. Maximum total power is 30 Watts under these conditions. 50 watts for <30 seconds with a maximum of 10% duty cycle Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth, input at nominal line voltage, 0.1uF and 47uF capacitor on outputs. Load test conditions are from minimum, 50% and 100% load conditions on each output. *Minimum loading of...

MAXIMUM COMPONENT HEIGHT MOUNTING HOLES Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England