USB Charger (Wall Mounting) PKS11-USB 10.5 Watt USB Charger Single 5V 2.1A output Features:• Universal 90-264VAC input • Interchangeable AC heads • Meets Level VI efficiency standards • Output via standard USB socket • Conforms to RoHS standards • Full International Safety Approvals • EMC to EN55022’B’, CISPR22 ‘B’ & FCC ‘B’ Electrical Specification Input Voltage & Frequency Input Current No Load Input Power Inrush Current on turn on Line Regulation Load Regulation Ripple & Noise Efficiency Turn On Delay Start Up Rise Time Hold Up Output Overshoot Temperature Coefficient Over Voltage Protection Short Circuit Protection Over Current Protection Safety Approvals EMC/EMI Dielectric Withstand Voltage Safety Class Leakage Current Operating Temperature Storage Temperature Relative Humidity Energy Efficiency 90-264VAC, 50/60Hz 0.5A max 0.1 Watts max 60A ±5% ±5% 120mV pk-pk 79.04% min 25-100% 4000mS 20 mSec 20 mSec <10 % ±0.05%/ºC Clamped by internal protection circuit With auto recovery Protected from ≤120% of rated output UL/cUL60950-1, TUV EN60950-1, A60950, CE EN55022’B’, CISPR22’B’ & FCC’B’ 3000VAC 5mA primary to secondary for 1 minute Class II <0.25mA 0 to 40ºC -20 to 80ºC 10-90% non conden

USB Charger (Wall Mounting) USB Charging Resistor Network Figure 2-USB Resistor Network for 2.1 A chargers Email: [email protected]

USB Charger (Wall Mounting) www.powersolve.co.uk Mechanical Specification Note: 1. Case cover & chassis material PC Black 2. AC Pin material brass (Ni plated) 3. PAHS REACH RoHS 4. Satin Finish Email: [email protected]