*mydirectindustry

Catalogs
Powersolve Electronics
PAK75-PAK200 Series

PAK75-PAK200 Series

Product catalog summary

Overview: The document provides technical specifications for Powersolve Electronics Ltd.'s AC-DC converters, specifically the PAK75, PAK100, PAK150, and PAK200 series. These converters are designed for universal AC input with active Power Factor Correction (PFC) and are characterized by high efficiency, reliability, and a wide operating temperature range.

Key Features:

Universal AC input with active PFC.
Green design with no-load power consumption under 0.7W.
Protections against short circuit, overvoltage, and overload.
High efficiency and long life.
Operating temperature range from -20°C to +70°C.
Power On LED indicator and 100% full load burn-in test.

Electrical Specifications:

Input Voltage: 90-264VAC full range, 50-60Hz / 127-370VDC.
Power Factor: >0.9 @ 230VAC / >0.98 @115VAC.
AC Input Current varies by model (e.g., 1A @ 115VAC for PAK75).
Inrush Current: 20A @ 115VAC / 45A @ 230VAC for PAK75 & PAK100.
Leakage Current: <2mA @ 230VAC.

Output Specifications:

Output Voltage and Current Ratings vary by model (e.g., PAK75-05: 5V, 15A, 75W, 83% efficiency).
Overload Protection: >105% of rated output power, with automatic recovery.
Overvoltage Protection: 115-150% rated output voltage, output latches off.
Over Temperature Protection: Shuts down at 90°C ±5°C, requires re-powering to recover.

Environmental and Safety Standards:

Operating Humidity: 20-90% RH non-condensing.
Storage Temperature Range: -40°C to +85°C.
Safety Standards: UL60950-1, TUV EN60950-1 approved.
EMI and EMS Compliance: EN55022, EN61000-3-2, EN61204-3, among others.

Mechanical Details:

Dimensions vary by model (e.g., PAK75 & PAK100: 157 x 98 x 42 mm).
Cooling: Free air convection for PAK75, PAK100, and PAK150; internal fan for PAK200.

Notes:

Parameters are measured at 230Vac input, rated load, and 25°C ambient temperature unless specified otherwise.
Ripple and noise are measured at 20MHz bandwidth.
Derating is required at low input voltages.
The power supply is a component for installation into final equipment, which must meet EMC Directives.

Catalog excerpts

AC-DC Converter PAK75/PAK100/PAK150/PAK200 Series 75-200W Active PFC Single Output Universal AC Input with active PFC Green Design, no-load power consumption <0.7W Short Circuit / Overvoltage / Overload Protections High Efficiency, Long Life and High Reliability Operating Temperature range -20°C to +70°C Power On LED Indicator 100% full load burn-in test Electrical Specification Input Voltage Power Factor AC Input Current (typ.) Inrush Current Leakage Current Output Voltage Output Current Overload Protection Overvoltage Protection Over Temperature Protection Operating Temperature Range Operating Humidity Storage Temperature Range Storage Humidity Temperature Coefficient Vibration Safety Standards Green Energy Withstand Voltage Isolation Resistance EMI Conduction & Radiation Harmonic Current EMS Immunity Cooling Dimensions Weight Notes: 1. All parameters NOT specifically mentioned are measured at 230Vac input, rated load and 25°C ambient temperature 2. Ripple and noise are measured at 20MHz bandwidth by using a 12” twisted pair wire terminated with a 0.1µF ceramic & 47µF electrolytic capacitors across the output 3. Derating is required at low input voltages. Derate linearly to 90% load at 90Vac under 100Vac input 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC Directives Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]

Open the catalog to page 1

AC-DC Converter Output Voltage and Current Ratings MODEL OUTPUT VOLTAGE MAX OUTPUT VOLTAGE RIPPLE & LINE LOAD POWER EFF. _Preset Range CURRENT TOLERANCE NOISE REG. REG. Max._ Mechanical Details JJJ_LU±UJJ_LUi_l-LiJ-LI_l LIJ-UU-LUJ-LLLI-LU_____ Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England

Open the catalog to page 2

AC-DC Converter www.powersolve.co.uk Mechanical Details (cont.) PAK150 series: 197(L) x 98(W) x 42(H) mm Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]

Open the catalog to page 3

PAK75-PAK200 Series

PAK75-PAK200 Series

Catalog excerpts

All Powersolve Electronics catalogs and technical brochures