P-IN2902000
3Pages

Catalog excerpts

Lead Acid Battery Charger Model P-IN2902000 24 Volt Lead Acid Charger • Overload and short circuit protection • 29.2V 2A 3 Stage Charger • LED Charge Indicator • CE and Safety Approvals Electrical Specification INPUT Input Voltage Input Current Input Frequency No Load Power Consumption 90-264 VAC wide input 1.5A max Vin 90VAC, rated load 47-63 Hz 0.5W OUTPUT Charging Output Voltage Output Current Output Power Efficiency Line Regulation Load Regulation Turn on Delay Hold Up Time Open cct Voltage 27.2V ±0.3V. See Voltage Current Charge Curves 2A ±0.2A. See Voltage Current Charge Curves 58 Watts ≥80% ±2% Max ±5% Max 3 Seconds Max 8mS Min PROTECTION Overload Protection Short Circuit Protection Input Protection Hiccup mode with auto recovery Capable of withstanding continuous short circuit with auto recovery Internal 3.15A fuse ENVIRONMENTAL Operating Temperature Storage Temperature Cooling Operation Humidity Storage Humidity Drop Test -20 to +40ºC full load normal operation -40 to +70ºC Convection 20 to 90% non condensing 20 to 90% non condensing Product dropped from height of 90cm onto dry wood surface will not be broken and pass insulation test 10MΩ MECHANICAL Dimensions Weight SAFETY Hi Pot Test Insulation Resistance 153 x 60 x 36.5mm Approx 420 grams CE, TUV, UL cUL, 3000VAC 5mA for 1 minute Primary to secondary 10Mohms min at 500V DC EMC Meets the following standards FCC Part 15B (Class B) AS/NZS CISPR 22 (Class B) EN5022 (Class B) Email: sales@p

Open the catalog to page 1

Lead Acid Battery Charger Voltage & Current Charging Curves 1. Charge Voltage Max 29.2V ±0.3V 2. Charge Voltage Min 21V 3. Charge Current Max 2A ±0.2A 4. Loading 12V x 2C Lead Acid Battery 5. Terminate Charge LED turns Green when current ≤300mA Email: sales@powersolve.co.uk

Open the catalog to page 2