P-IN2902000 LEAD ACID BATTERY

1 / 3 PagesView full catalog

P-IN2902000 LEAD ACID BATTERY

Product catalog summary

Specifications

Input: Voltage range of 90-264 VAC, maximum current of 1.5A at 90VAC, frequency between 47-63 Hz, and no-load power consumption of 0.5W.
Output: Charging voltage of 27.2V ±0.3V, output current of 2A ±0.2A, total output power of 58 Watts, efficiency of ≥80%, line regulation of ±2% max, and load regulation of ±5% max.
Performance: Turn-on delay of 3 seconds max and hold-up time of 8ms min.

Protection

Overload protection with hiccup mode and auto recovery.
Short circuit protection with auto recovery.
Input protection via an internal 3.15A fuse.

Environmental Conditions

Operating temperature range from -20 to +40ºC under full load.
Storage temperature range from -40 to +70ºC.
Humidity for operation and storage between 20 to 90% non-condensing.
Drop test: Product can withstand a drop from 90cm onto a dry wood surface without breaking and passes insulation test of 10MΩ.

Mechanical Specifications

Dimensions: 153 x 60 x 36.5mm.
Weight: Approximately 420 grams.

Safety and Compliance

Certifications: CE, TUV, UL, cUL.
Hi Pot Test: 3000VAC 5mA for 1 minute.
Insulation resistance: Primary to secondary 10Mohms min at 500V DC.

EMC Standards

Compliance with FCC Part 15B (Class B), AS/NZS CISPR 22 (Class B), and EN5022 (Class B).

Additional Features

Designed for lead acid battery charging with a 3-stage charging process.
LED charge indicator that turns green when the current is ≤300mA.

Catalog excerpts

Model P-IN2902000 24 Volt Lead Acid Charger • Overload and short circuit protection • 29.2V 2A 3 Stage Charger • LED Charge Indicator • CE and Safety Approvals

Open the catalog to page 1

Voltage & Current Charging Curves Constant current charge LED Red Termination current Constant voltage 4. Loading 12V x 2C Lead Acid Battery 5. Terminate Charge LED turns Green when current <300mA Email: [email protected]

Open the catalog to page 2