*mydirectindustry

p-in1504000

1 / 3 PagesView full catalog

p-in1504000

Product catalog summary

Specifications

Input: Voltage range of 90-264 VAC, current up to 1.5A at 90VAC, frequency between 47-63 Hz, and no-load power consumption of 0.5W.
Output: Charging voltage of 13.6V ±0.2V, current of 4A ±0.2A, power output of 58 Watts, and efficiency of ≥80%. Line regulation is ±2% max, load regulation is ±5% max, with a turn-on delay of 3 seconds max and hold-up time of 8ms min.

Protection

Overload protection with hiccup mode and auto recovery.
Short circuit protection withstanding continuous short circuit with auto recovery.
Input protection via an internal 3.15A fuse.

Environmental Conditions

Operating temperature range from -20 to +40ºC under full load.
Storage temperature range from -40 to +70ºC.
Humidity for operation and storage between 20 to 90% non-condensing.
Drop test from 90cm onto a dry wood surface without breaking and passing insulation test of 10MΩ.

Mechanical Specifications

Dimensions: 153 x 60 x 36.5mm.
Weight: Approximately 420 grams.

Safety and Compliance

Certifications: CE, TUV, UL, cUL.
Hi Pot Test: 3000VAC 5mA for 1 minute.
Insulation resistance: Primary to secondary 10Mohms min at 500V DC.

EMC Standards

Compliance with FCC Part 15B (Class B), AS/NZS CISPR 22 (Class B), EN5022 (Class B).

Additional Features

Model: P-IN1504000, 12 Volt Lead Acid Charger.
Features overload and short circuit protection, 14.6V 4A 3-stage charging, and LED charge indicator.
Charging curves specify a max charge voltage of 14.6V ±0.2V, min charge voltage of 10.5V, and max charge current of 4A ±0.2A.
Charging terminates when LED turns green at current ≤500mA.

Catalog excerpts

Lead Acid Battery Charger Model P-IN1504000 12 Volt Lead Acid Charger • Overload and short circuit protection • 14.6V 4A 3 Stage Charger • LED Charge Indicator • CE and Safety Approvals Electrical Specification INPUT Input Voltage Input Current Input Frequency No Load Power Consumption 90-264 VAC wide input 1.5A max Vin 90VAC, rated load 47-63 Hz 0.5W OUTPUT Charging Output Voltage Output Current Output Power Efficiency Line Regulation Load Regulation Turn on Delay Hold Up Time Open cct Voltage 13.6V ±0.2V. See Voltage Current Charge Curves 4A ±0.2A. See Voltage Current Charge Curves 58 Watts ≥80% ±2% Max ±5% Max 3 Seconds Max 8mS Min PROTECTION Overload Protection Short Circuit Protection Input Protection Hiccup mode with auto recovery Capable of withstanding continuous short circuit with auto recovery Internal 3.15A fuse ENVIRONMENTAL Operating Temperature Storage Temperature Cooling Operation Humidity Storage Humidity Drop Test -20 to +40ºC full load normal operation -40 to +70ºC Convection 20 to 90% non condensing 20 to 90% non condensing Product dropped from height of 90cm onto dry wood surface will not be broken and pass insulation test 10MΩ MECHANICAL Dimensions Weight SAFETY Hi Pot Test Insulation Resistance 153 x 60 x 36.5mm Approx 420 grams CE, TUV, UL cUL, 3000VAC 5mA for 1 minute Primary to secondary 10Mohms min at 500V DC EMC Meets the following standards FCC Part 15B (Class B) AS/NZS CISPR 22 (Class B) EN5022 (Class B) Email: sales@p

Open the catalog to page 1

Lead Acid Battery Charger Voltage & Current Charging Curves 1. Charge Voltage Max 14.6V ±0.2V 2. Charge Voltage Min 10.5V 3. Charge Current Max 4A ±0.2A 4. Loading 12V x 1C Lead Acid Battery 5. Terminate Charge LED turns Green when current ≤500mA Email: [email protected]

Open the catalog to page 2