AC-DC Converters MP Series Modular Configurable Power Supplies 400-1200 Watts Single & Multi Outputs • Current share on all outputs with ratings of 10A or greater • Remote sense on all outputs with ratings greater than 2A • Overload protection on all outputs • Voltage adjustment on all outputs • Margining on all single output modules • Input OK signal and status indicator LED • Global DC OK signal and status indicator LED • Global and individual module inhibits/enable • 2 year warranty • Forced air cooling, field replaceable fan • Isolated 5V bias voltage • Power factor correction • EN61000-3-2 harmonic distortion compliance • CISPR 22, EN55022 Curve B conducted / radiated EMI • European CE Mark requirements • Optional VME timing and system DC OK module • Customer-provided air option • Additional 200W output @ high line (180-264 VAC) • Low leakage option for medical applications • EN61000 immunity standards • Standard modification flexibility (consult factory) - Low noise fan - Fan fail signal - Module enable - Outputs down to 0.5V Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

AC-DC Converters www.powersolve.co.uk Electrical Specification INPUT Input voltage Frequency Inrush current Efficiency Power factor Turn-on time EMI filter standard EMI filter (low leakage option) Leakage current standard Leakage current (low leakage option) Radiated EMI Holdover storage AC OK Harmonic distortion Isolation Global Inhibit/Enable Input fuse (internal) Warranty OUTPUT Adjustment range Margining Overall reg Ripple RMS 85-264 VAC 120-350 VDC 47-440 Hz 40 A peak max. (soft start) 70-80% typ. @ full case load 0.99 typ. meets EN61000-3-2 AC on 1.5 sec typ., Inhibit / Enable 150 ms typ....

AC-DC Converters www.powersolve.co.uk Electrical Specification (ctd) ENVIRONMENTAL Operating temperature Shock/Vibration Humidity Storage temperature Temperature coefficient Cooling Safety Approvals -20°C to 50°C (start @ 0°C) (derate each output linearly to 50% at 70°C) (-20°C to 40°C max. with rear air option) Mil-Hdbk 810E 95% non-condensing -40°C to +85°C 0.02% per °C Internal DC fan or customer provided air (option) UL, CSA, IEC, VDE, BABT, CB, CE Note: 1. Single output modules only. 2. Single and main of dual output modules only. 3. Contact factory for optional preload if required. Power...

AC-DC Converters www.powersolve.co.uk Common Examples and Specifications Outputs 1 Max output power 210W Max output current 35 A Volts 2-60 V Standard voltage increments 25 Remote sense on outputs Yes Remote margin/V-Program Yes Module inhibit (isolated) Yes Single wire active current share Yes Over voltage / Over current protection Yes Minimum load required No Slots occupied in any MP case 1 Dual 2 144W 10 A 2-28 V 19 Yes, both No --Yes, main only Yes Yes (10%). main only 1 Triple 3 36W 2A 2-28 V 18 No No ----Over current No 1 Modules Voltage Voltage Code Single Output Module Code Single Output...

AC-DC Converters www.powersolve.co.uk Ordering Information INPUT 85-264 VAC 400 W max. 600 W max. 800 W max. 1000 W max.* Case Size (inches) Slots 4 = 2.5 x 5 x 10 5 available slots 6 = 2.5 x 5 x 11 5 available slots 8 = 2.5 x 7 x 10 6 available slots 1 = 2.5 x 8 x 11 7 available slots *1200 W available at high line operation Option Code 0 = no options 1 = rear air exhaust 3 = global enable 5 = option package (options 1 & 3) M = low leakage N = low leakage plus option 1 P = low leakage plus option 3 R = low leakage plus option 5 XXX Use ” _ ” for Standard Remote Sense Use ” / ” After and module...

AC-DC Converters www.powersolve.co.uk Single Outputs Total Power Output (Volts/Amps) Size (Inches) Model Number Multiple Outputs Total Power Size (Inches) Model Number Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

DC-DC Converter Output Modules Pin Connection Control Signal Information, J1 Control Connector Remote Margin / V. Program Margin High - Remote Sense / Margin Low single or dual o/p main Module, Isolated Inhibit Module Inhibit return single or dual o/p main dual o/p, single is spare dual o/p, single is spare single or dual o/p main Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England PIN 1

AC-DC Converters www.powersolve.co.uk MP Series MP4 (400/600 Watts Max) MP6 (600/800 Watts Max) J1 Control Connector Standard for all cases Global Inhibit/Optional Enable Return Global Inhibit/Optional Enable Logic “1” Spare J1-6 Global Inhibit/Optional Enable Logic “0” SELV 5V Housekeeping Return Standard Airflow MOUNTING HOLES DIMENSIONS IDENTICAL ON BOTH SIDES +.0 -.5 +.00 5.00 -.02 Note: 1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m). 2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010...

AC-DC Converters www.powersolve.co.uk • MP8 Case: 4.1lbs • 36W Triple: 0.5 lb. • 210 W Single: 0.6 lb • 360W Single 1.0 lb • 600W Single: 2.0 lbs. • 144W Dual: 0.6 lb M4 MOUNTING HOLES MARKED “B” (4X) Standard Airflow #8-32 MOUNTING HOLES MARKED “A” (4X) OUTPUT MODULE AREA Note: 1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m). 2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins....

MOUNTING HOLES - DIMENSIONS IDENTICAL ON BOTH SIDES OUTPUT MODULE AREA Input: Barrier type. Three No. 6-32 B.H. screws (0.375" centers). Max torque: 6 in-lbs. (0.67 N-m). Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins, Chassis material: aluminum with chemical film coating (conductive). All dimensions are in millimeters and inches, and are typical. Customer mounting -3 sides...