Catalogs >
Powersolve Electronics >
MHP40-100 Series

MHP40-100 Series
4Pages

Catalog excerpts

AC-DC Converters www.powersolve.co.uk Compact Size - High Power Density Industrial & Medical Approvals Low Leakage Current Level B Conducted Emissions EN61000-3-2, -3 Compliant Convection Cooled Class II Approved 40-60 W Models Electrical Specification INPUT Input Voltage Input Frequency Input Current Inrush Current Earth Leakage Current Input Protection OUTPUT Output Voltage Output Voltage Trim Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Cross Regulation Over/Undershoot Transient Response Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient GENERAL Efficiency Isolation Switching Frequency Power Density MTBF ENVIRONMENTAL Operating Temperature Cooling Operating Humidity Storage Temperature Operating Altitude Shock Vibration EMC & SAFETY Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions Safety Approvals 90-264 VAC (120-370 VDC) 47-63 Hz; 440 Hz 40 W: 0.4 A max at 230 VAC, 60 W: 0.6 A max at 230 VAC, 100 W: 0.9 A max at 230 VAC 40 A max at 230 VAC <100 µA at 115 VAC, <200 µA at 230 VAC Internal 3.15 A fuse in line and neutral See tables ±5% on 3.3 V & 5 V versions, ±10% on other single output models and V1 of multi-output models. See note 1 for MHP40/60 models ±1.0% V1, ±5% V2, V3 & V4 See tables 2 s max 50 ms 16/75 ms min at 115/230 VAC ±0.5% ±1% single output models; ±3% V1, ±5% V2 & V3 MHP40/60 multi-output models. ±1% V1 & V2, ±5% V3 & V4 MHP100 2% on MHP40/60 only None at turn on/off 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change 1% pk-pk, 20 MHz bandwidth 115-135% Vnom, recycle input to reset 110-150% on primary power limit, auto recovery Trip and restart (Hiccup mode) 0.05%/°C 80-85% depending on model 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground 70 kHz typical 60 W: 6.25 W/In3, 100 W: 7.40 W/In3 250 kHrs per MIL-HDBK-217F 0 °C to +70 °C. Refer to derating curves for specific operating limitations. Convection & fan cooled ratings (see derating curves) 95% RH, non-condensing -20 °C to +85 °C 3000 m 30 g pk, half sine, 6 axis 2 g rms, 5 Hz to 500 kHz, 3 axis EN60601-1-2, EN61204-3, FCC 20780, EN55022 & EN55011, level B conducted EN61000-3-2 EN61000-3-3 EN61000-4-2, level 2 Perf Criteria A EN61000-4-3, 10 V/m Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, level 3 Perf Criteria A EN61000-4-6, 10 V Perf Criteria A EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B EN60950, UL60950, CSA 22.2 601.1, EN60601-1, UL60601-1, CCC pending, contact sales Powe rsolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk

Open the catalog to page 1

AC-DC Converters OUTPUT 1 OUTPUT 2 OUTPUT 3 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix (-C) to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 40 W. Molex series 5194 crimp terminals Molex series 5194 crimp terminals MECHANICAL DETAILS 1. All dimensions in inches (mm). Tolerance .xx = ±0.02 (0.50); .xxx = DERATING CURVES Note: Derate by 10% if cover is fitted Powffsolve Electronics Ltd. 8A, Arnhem Road,...

Open the catalog to page 2

OUTPUT 2 VOLTAGE CURRENT MIN/MAX OUTPUT 3 VOLTAGE CURRENT MIN/MAX 3.75 (95.25) Notes: 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix (-C) to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 60 W. J1 4X ø0.156 (3.96) mounting holes ø0.312 (7.92) clearance top and bottom J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals. Optional ground (0.25 faston) tab available, contact sales. Line...

Open the catalog to page 3

AC-DC Converters www.powersolve.co.uk MODELS AND RATINGS Single Output Models MODEL NUMBER MHP100-3V3(C) MHP100-05(C) MHP100-07(C) MHP100-09(C) MHP100-12(C) MHP100-15(C) MHP100-18(C) MHP100-24(C) MHP100-33(C) MHP100-48(C) OUTPUT CURRENT MAXIMUM 15.0 A 15.0 A 11.4 A 8.8 A 7.5 A 6.0 A 5.0 A 4.1 A 3.0 A 2.1 A OUTPUT 3 VOLTAGE CURRENT MIN/MAX -12.0 V -12.0 V -15.0 V +12.0 V +12.0 V -5.0 V -5.0 V +12.0 V +12.0 V +12.0 V +15.0 V -12.0 V -15.0 V OUTPUT 4 CURRENT MIN/MAX Notes: 1. To receive unit with cover fitted, add suffix (-C) to model number. 2. Output 3 available with opposite polarity for...

Open the catalog to page 4

MHP40-100 Series 4Pages

Catalog excerpts

All Powersolve Electronics catalogs and technical brochures

MHP40-100 Series
4Pages