*mydirectindustry

Catalogs
Powersolve Electronics
MDC060 Single Output Series

MDC060 Single Output Series

Product catalog summary

Overview: The MDC-060 series is a range of AC-DC LED drivers designed for outdoor lighting applications, offering 60W to 70W power output. These drivers feature a robust design with built-in surge protection, active power factor correction (PFC), and a wide input voltage range.

Key Features:

10KV lightning surge protection compliant with EN61000-4-5.
Input voltage range from 90 to 305VAC with active PFC.
Output voltage up to 200VDC, suitable for outdoor lighting.
IP65/IP67 waterproof aluminum casing.
Dual mode over-temperature thermal design and automatic output voltage tracing.
3-in-1 output current dimming function (Type B) and optional timer dimming.
Class 2 power unit with UL/CB/CCC/CE/PSE approvals and a 5-year warranty.

Specifications:

Output current ranges from 350mA to 2280mA, with adjustable ranges for each model.
Efficiency up to 91% depending on the model.
Input specifications include a power factor greater than 0.98 at 115VAC and total harmonic distortion (THD) less than 20% at 230VAC.
Output specifications include a current tolerance of ±5% and ripple & noise levels specific to each model.

Protections:

Short circuit and over-voltage protection with auto recovery or power reset.
Over-temperature protection with automatic de-rating above 70°C.

Environmental and Safety Standards:

Operating temperature range from -40°C to 70°C with non-condensing humidity.
Compliance with safety standards such as UL 8750 and EN 61347.
EMI and EMS standards compliance, including EN 55015 and EN 61547.

Dimming and Control:

Type B models support dimming via 0-10V, PWM signal, or resistor.
Dimming curves and function blocks are provided for precise control.

Performance Curves:

Efficiency and power factor curves are provided for different load conditions.
Output characteristics include constant voltage and constant current modes.

Catalog excerpts

AC - DC 60W~70W LED Driver MDC060 Single Output Series Features Built-in 10KV lightning surge protection (EN61000-4-5) 90 ~ 305Vac full range input; Active PFC Output voltage range up to 200Vdc for outdoor lighting Aluminum case IP65/ IP67 waterproof Dual mode over temperature thermal design Output voltage automatic tracing & fixing function Built-in 3 in 1 output current dimming function (Type B) Optional timer dimming function Class 2 power unit / Pass LPS ; Long lasting life time All Series approved to UL/CB/CCC/CE/PSE Outdoor LED luminaries rugged driver solutions 5 years warranty SU R Type A: IP65 grade，Output current adjustable by internal variable resistor Type B: IP67 grade，Output current dimming by 0~10V/10V PWM signal/Resistor Output Voltage Output Voltage Rated Output Output Current Rated Output Power 1. For Type A only 2. Please refer to ” LED Driving Output Mode“ chart 3. Efficiency test condition please refer to ”Efficiency v.s. Load“ chart Input Specification Input Voltage Range (1) Input Frequency Total Harmonic Distortion

Open the catalog to page 1

AC - DC 60W~70W LED Driver MDC060 Single Output Series Inrush Current (Typ.) 60A peak @ 230VAC, Cold Start Leakage Current Please refer to “ Input Voltage v.s. De-Rating Curve“ chart Please refer to “ PFC v.s. Load Curve” chart Output Specification Output Current Tolerance Output Ripple Current Line Regulation Turn-on Time 1. Ripple current is measured at 20MHz of bandwidth. The measured terminal is paralleled with a 22uF E-cap and a 0.1uF Ceramic cap. General Specification Life Time Short Circuit Auto recovery or Power reset Over Voltage Power reset Over Temperature De-Rated (1) Over 70℃ , automatic...

Open the catalog to page 2

MDC060 Single Output Series S5 T Case: Maximum temperature of chassis ♦ Dimming Mode (Type B only) * Do not put "-V (BLACK)" & "- (WHITE)" in connection

Open the catalog to page 3

AC - DC 60W~70W LED Driver MDC060 Single Output Series ＊Short ~ 100KΩ adjust output current ( MDC0601750 ) Resistor value Rated Current rate ＊0 ~ 10Vdc adjust output current ( MDC0601750 ) 0V Rated Current rate ＊10 V PWM adjust output current；Frequency range 100Hz~3KHz ( MDC0601750 ) 0% Rated Current rate Output Current Duty cycle of 10V PWM (frequency range = 100~3KHz) Dimming input ※ Note : 1. The output current drops down to 2.2% when the dimming input is short or 0Vdc. 2 . 0 ~ 1V dimming application please consult sales office. V Power Switching Rectifiers & Filter LED+ Dimming control CC/CV...

Open the catalog to page 4

AC - DC 60W~70W LED Driver MDC060 Single Output Series  LED Driving Output Mode LED driver output characteristics with constant voltage mode (CV) & constant current mode (CC) to direct drive all kinds of LED lighting correctly Connecting LED load start up waveform: No load start up waveform: Vout = Vled ; Iout = Iset (CC) (Iset = Default output current) Vno_load Output voltage curve: Constant voltage Output voltage curve: Vout = Vled Output current curve: Constant current Output current curve: No load 0A Output Load De-Rating Curve Temperature v.s. De-Rating Curve Input Voltage v.s. De-Rating...

Open the catalog to page 5

All Powersolve Electronics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list