DIN Rail Made in Germany 720W Programmable DC Power Supply Short Specification: • • • • • • • • • • Metal housing 90% efficiency -25°C...+60°C full output power Natural convection Galvanic insulated Continuous short circuit protected Overload (OVP) & low voltage protected Soft start & auto-recovery Hold up time >40ms No base load required Analogue interface 0-10Vdc/0-20mA/4-20mA(option) External shutdown Sense control Series & parallel operation DIN Rail 35mm & wall mount Screw terminals AWG20...AWG6 High reliability, shock & vibration proof 24 hours burn in test EMI/EMS EN61000-6-2,3, EN55022 class B IEC(EN)60950-1 in accordance to cUL60950/16950 Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771 www.powersolve.co.uk [email protected] p.1/5 03.12B (Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

AC Input AC Input Rating Rated DC Voltage Overvoltage Protection Sense function Compensation 2V per lead load, protective electrical separation ≤60Vdc Remote Shutdown protective electrical separation ≤60Vdc Analogue Interface see table, 4-20mA available option, protective electrical separation ≤60Vdc, work.res.=500Ω Derating Accurancy Latency Interface Load regulation Response Load Change Base Load Efficiency 230Vac Short Circuit Protection Idling-proof Temperature Control Hold Up Time Inrush Current Softstart Cooling Ambient Operating Temp. Ambient Storage Temp. Environment EMI EMS Safety Safety...

1 = transient filter 2 = rectifier 3 = inrush limiter NTC 4 = load capacitor 5 = transformer 6 = storage throttle 1) Active Transient Filter 3) Inrush Current Limiter Technical Description The HSEUreg-Series is a programmable switch mode power supply. Engineered and manufactured in by CAMTEC in Germany, it is designed for challenging applications like railway, drives, test-stands and machine-building. The HSEUreg provides a low Ripple-Noise, good LoadRegulation and high efficiency >90% (typ. @ 230Vac). High-end long life capacitors guarantee Hold-up-Time and extended lifetime of the power supply....

Coating Option We offer the USEUIreg-series with optional coating. It is to be used in e.g. dusty, dirty, high humidity, or in awaiting quick temperature changes. Short circuit and corrosion at print board lines and at solder points can be prevented. The coat itself is a transparent acrylic resin. It is procured with a robotics varnishing machine. Peters SL 1306 N-FLZ (transparent) IEC60216-1 2001, IPC-CC-830B, UL listed as permanent coating FileNo.: E80315 , UL94V-0 Ordering Information: ad extension C to the complete type number: HSEUreg07201.180TC or HSEUreg07201T420C Test Time A B C D Type...

Safety Instructions: Please read all warnings and advices carefully before installing or operating the HSEUreg. Retain this operation manual always ready to hand.The HSEUreg must be installed by specialist staff only. The HSEUreg is designed for systems fulfilling the safety norms of dangerous voltages/energy and fire prevention Installation is restricted to specialists only, make sure that the AC wire system is free of voltage Opening the HSEUreg, making any modifications to it, dismounting any screws from it, operating the HSEUreg out of specification and/or using it in appropriate area will...