DIN Rail Made in Germany 720W Programmable Power Supply current and voltage programmable Specification: • • • • • • • • • • • Metal housing 90% efficiency -25°C...+60°C full output power Natural convection Galvanic insulated Continuous short circuit protected Overload (OVP) & low voltage protected Soft start & auto-recovery Hold up time >40ms No base load required Electronic inrush current limiter 13.8Apeak Analogue interface 0-5Vdc/0-10Vdc/0-20mA/4-20mA Real time output monitoring of voltage and current External shutdown Sense control Series & parallel operation DIN Rail 35mm & wall mount Screw terminals AWG20...AWG6 High reliability, shock & vibration proof 24 hours burn in test EMI/EMS EN61000-6-2,3, EN55022 class B IEC(EN)60950-1 in accordance to cUL60950/16950 Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771 www.powersolve.co.uk [email protected] p.1/9 05.12D (Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

AC Input Range AC Input Rating Rated DC Voltage Overvoltage Protection Operation failure relay Yes, break contact (fig.4), protective electrical separation ≤60Vdc Sense function Compensation 2V per lead load, protective electrical separation ≤60Vdc Remote Shutdown Yes, protective electrical separation ≤60Vdc Analogue Interface Yes, protective electrical separation ≤60Vdc Digital Interface Yes, available option (incl. Software), protective electrical separation ≤400Vdc (t.b.a.) Derating Accuracy Load regulation Slew Rate Response Load Change Base Load Efficiency 230Vac Short Circuit Protection...

Ordering Information: Output Type (DIN-Rail standard) Part Number Built-in 5W Power Sink Part Number Part Number USB 2.0 Interface UI.Drive Software XP/W7/W8 ADTW201 DC-repeater PS200 external 200W Power Sink Conception The HSEUIreg power supply series realizes very high power efficiency in a space-saving housing. Latest generation electrical devices relate to the high reliability of all CAMTEC products. The CAMTEC philosophy is, to employ 125°C low ESR ultra long life capacitors where expedient to achieve a superior lifetime of our products. The HSEUIreg-series is made for Measuring & Control-Units...

1) Active Transient Filter 3) Inrush Current Limiter Lighting: CV = constant voltage operation CC = constant current operation Technical Description The HSEUIreg-Series is a programmable switch mode power supply. Engineered and manufactured in by CAMTEC in Germany, it is designed for challenging applications like railway, drives, test-stands and machine-building. The HSEUIreg provides a low Ripple-Noise, good Load- Regulation and high efficiency >90% (typ. @ 230Vac). High-end long life capacitors guarantee Hold-up-Time and extended lifetime of the power supply. Our HSEUIreg-design starts complex...

Monitor Output Connections (fig.2) Program Input Connections (fig.4) (example with external poti) Monitor Outputs The monitor outputs are buffered with OP-amplifiers, preresistors & parallel connected zener diodes (fig.1). The monitor outs can be selected between +5Vdc or +10Vdc control voltage. The signal is absolute proportional to the adjusted output voltage and current. The monitor outputs are non-floating. Connections see figure 2. Programmable Inputs The output voltage and the output current are programmed with an analogue signal. The input signal is selectable between 0-5Vdc, 0-10Vdc,...

Series Connection (fig.1) To increase output voltage equal HSEUIreg can be connected in series. The control I/O should be galvanic insulated in the series mode. If not the minus main output is connected to the control I/O. Use our external option Isolating Transformer ADTW201 being validated with the HSEUIreg. Be aware of safety norms if your target output voltage exceeds safety voltage. Parallel Connection (fig.2) To increase the output power up to 5 HSEUIreg can be parallel connected. Advise using busbars to connect HSEUIreg in parallel. Always use identical length and identical cross sections...

Power Sink (Option) The power sink option features returned power to be terminated very quickly. The power sink records the output power status and guarantees a constant output voltage. The power sink also provides quicker response time on setting down the output voltage. Applications sample: DC-drives & ATE test systems Most of modern dc-drives are controlled by a PWM (pulse wide modulation) controller. Such controllers feature a very flexible speed control and high efficiency. A disadvantage of PWM controlled drives is the returned power into the system while decelerating the motor. The dragging...

Coating Option We offer the USEUIreg-series with optional coating. It is to be used in e.g. dusty, dirty, high humidity, or in awaiting quick temperature changes. Short circuit and corrosion at print board lines and at solder points can be prevented. The coat itself is a transparent acrylic resin. It is procured with a robotics varnishing machine. Peters SL 1306 N-FLZ (transparent) IEC60216-1 2001, IPC-CC-830B, UL listed as permanent coating FileNo.: E80315 , UL94V-0 Ordering Information: ad extension C to the type number: HSEUIreg07201.180TC Test Time A B C ¹) D Type test and factory tests are...

Safety Instructions: Please read all warnings and advices carefully before installing or operating the HSEUIreg. Retain this operation manual always ready to hand.The HSEUIreg must be installed by specialist staff only. The HSEUIreg is designed for systems fulfilling the safety norms of dangerous voltages/energy and fire prevention Installation is restricted to specialists only, make sure that the AC wire system is free of voltage Opening the HSEUIreg, making any modifications to it, dismounting any screws from it, operating the HSEUIreg out of specification and/or using it in appropriate area...