*mydirectindustry

CFM40-60 Series

Product catalog summary

Overview: The document provides technical specifications for the CFM40/60 Series AC-DC converters by Powersolve Electronics Ltd. These converters offer single output with power ratings of 40W and 60W.

Features: The converters have a universal input range of 90-264 VAC and exhibit high efficiency, typically at 88%. They meet CISPR/FCC Class B standards for conductive EMI.

Input Specifications:

Voltage: 90 - 264 VAC
Frequency: 47 to 63 Hz
Inrush Current: 50A max at 264VAC
Isolation: 4,242Vdc from input to output
Leakage Current: 3.5mA max

Output Specifications:

Hold-up Time: 8ms typical at 115VAC
Short Circuit Protection: Continuous
Temperature Coefficient: +0.05°C

Environmental Conditions:

Operating Temperature: 0 to 50°C
Storage Temperature: -20 to 85°C
Cooling: Free air convection

Mechanical Characteristics: Dimensions are 101.6 x 50.8 x 30.48 mm.

Electrical Specifications: Typical conditions are at 25°C, nominal line, and 75% load unless specified otherwise.

Notes:

Ripple & Noise measurement requires additional capacitors.
Line and load regulations are specified for full load and 10% load respectively.
Input and output connectors are compatible with specific Molex components.

Model Specifications:

40 Watt Series: Models range from 3.3V to 48V with varying maximum loads and efficiencies up to 88%.
60 Watt Series: Models range from 3.3V to 48V with varying maximum loads and efficiencies up to 88%.

Catalog excerpts

AC-DC Converters www.powersolve.co.uk CFM40/60 Series 40/60 Watt Single Output Features • Universal Input 90-264 Vac • High Efficency at 88% Typical • Conductive EMI Meets CISPR/FCC Class B Electrical Specification INPUT Input voltage Input frequency Inrush Current Leakage Current OUTPUT Hold-up Time Short Circuit Protection Temperature Coefficient ENVIRONMENTAL Operating Temperature Storage Temperature MECHANICAL CHARACTERISTICS Dimensions Typical @ 25°C, nominal line and 75% load, unless otherwise specified Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected]

Open the catalog to page 1

AC-DC Converters MODEL OUTPUT MAX MIN RIPPLE & VOLTAGE LINE LOAD EFF _VOLTAGE LOAD LOAD_NOISE ACCURACY REGULATION REGULATION % MODEL OUTPUT MAX MIN RIPPLE & VOLTAGE LINE LOAD EFF _VOLTAGE LOAD LOAD_NOISE ACCURACY REGULATION REGULATION % 1. Add a 0.1|iF ceramic capacitor and a 10|iF E.L capacitor to output for Ripple & Noise measuring @20MHz BW. 2. Line regulation is measured from High Line to Low Line with full load. 3. Load regulation is measured from Full to 10% load. 4. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 5. Output connector mates with...

Open the catalog to page 2

All Powersolve Electronics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list