www.powersolve.co.uk • Sinusoidal Output from 12-480 V • Compact Switched Mode Design • DC Inputs 10-400 V • Wall or Rack Mounting • Industrial Grade • Customised Design Available Input Input Voltage • See Table No load Input Power • 20 W typical Earth Leakage Current • <3.5 mA at 230 VAC General Efficiency Isolation Output Output Voltage Output Voltage Adjustment Minimum Load Wave Form Frequency Distortion Rise Time Power Factor Crest Factor Line Regulation Load Regulation Overload Protection Short Circuit Current Surge Power Temperature Coefficient See Table 110 V version 110 V to 125 V 230 V version 210 V to 245 V No minimum load required Sinusoidal standard, optional wave shape programmable by external signal Crystal stabilized 50 Hz, 60 Hz, 400 Hz or 45 to 400 Hz adjustable 3% typical (5% at 400 Hz) 100 ms typical Cos 0>0.7 inductive/capacitive 3 0.1% for CI models, 2.0 % for I, IT & IV models (±10% change Vin) 50/60 Hz 1% typical 3% max, 400 Hz 3% typical 5% max (10-90% load change) Current limited to approx 105% I Nom (Steady State) Electronically limited to 3 x I Nom 2 x P Nom for 1 sec 0.05%/°C typical Switching Frequency MTBF Environmental Operating Temperature Storage Temperature Cooling Operating Humidity Operating Altitude EMC & Safety Emissions EFT/Burst Surge Safety Approvals 85-95% I models, 75-90% CI, IT & IV models 3500 VDC Input to Output, 3500 VDC Input to Ground, 3500 VDC Output to Ground Approx 33 kHz converter & 20 kHz Inverter section 120,000 hours I & IT models, 70,000 hours CI models, 50,000 hours IV models Contact Sales Contact Sales -20 °C to +75 °C, derate linearly at 2.5%/°C from +55 °C Optional -40 °C to +75 °C -40 °C to +85 °C Natural convection (IT5600 to IT5800 forced cooled) 5-95% RH non-condensing 1000 m EN55022 Level A conducted, optional Class B EN61000-4-4 Level 3 EN61000-4-5 Level 3 EN60950 Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England Tel:01635 521858 Fax: 01635 523771 Email: [email protected] 1

www.powersolve.co.uk CI Series - Converters & Inverters, Isolated DC Input 0.5-3.5 kVA Input (VDC) Output Notes: 1. Models supplied by external PFC module with 93-264 VAC input 3. External fan recommended, detaiis to be advised at time of order 2. For 12 V DC nominal input contact sales. 1. Models supplied by by external PFC module with 93-264 V AC input. 3. For other output voltages the output transformer can be modified - contact Sales. 2. Output transformer needs to be installed externally because of weight e.g. on mounting plate (wall mount version). Powersolve Electronics Ltd. 8A,...

www.powersolve.co.uk V Series - Inverters & Transformers, Isolated 3 Phase 0.6-7.5 kVA Notes: 1. Output transformers need to be installed externally because of weight. 3. For other output voltages the output transformer can be modified - contact Sales. 2. Models supplied by by external PFC module with 93-264 VAC input. 4. 3-Phase output systems for power up to 36 kVA can be chieved - contact Sales.

Application Details Wall Mounting Plate Option ‘W' available for 3U/6U models. Higher input current models use stud terminals. Ordering Details Example: CI1628.5 describes an inverter operating from a battery voltage in the range 18-36 VDC and provides a 50 Hz sinusoidal output of 230 V RMS at 500 VA. Other Options See AC-DC C Series for options. Customised designs - to special order - consult Sales. Frequency Designation Add suffix to model number .0 External control (specify at time of order) .51 Synchronized with 50 Hz mains .61 Synchronised with 60 Hz mains .1 and .2 Frequency internally...