Catalogs >
Powersolve Electronics >
AC-DC Converters

AC-DC Converters
10Pages

Catalog excerpts

MP4 MP6 MP8 MP1 Current share on all outputs with ratings of 10A or greaterՕRemote sense on all outputs with ratings greater than 2AOverload protection on all outputsՕVoltage adjustment on all outputsMargining on all single output modulesՕInput OK signal and status indicator LEDGlobal DC OK signal and status indicator LEDՕGlobal and individual module inhibits/enable2 year warrantyՕForced air cooling, field replaceable fanIsolated 5V bias voltageՕPower factor correctionEN61000-3-2 harmonic distortion compliance ՕCISPR 22, EN55022 Curve B conducted / radiated EMIEuropean CE Mark requirementsՕOptional VME timing and system DC OK moduleCustomer-provided air option ՕAdditional 200W output @ high line (180-264 VAC)Low leakage option for medical applicationsՕEN61000 immunity standardsStandard modification flexibility (consult factory)- Low noise fan - Fan fail signal - Module enable - Outputs down to 0.5V >

Open the catalog to page 1

INPUT Input voltage85-264 VAC 120-350 VDC Frequency47-440 Hz Inrush current40 A peak max. (soft start) Efficiency70-80% typ. @ full case load Power factor0.99 typ. meets EN61000-3-2 Turn-on timeAC on 1.5 sec typ., Inhibit / Enable 150 ms typ. EMI filter standard CISPR 22EN55022 Level BӔ EMI filter (low leakage option) CISPR 22EN55022 Level AӔ Leakage current standard 2.0 mA max. @ 240 VAC Leakage current (low leakage option)300 A max. @ 240 VAC Radiated EMICISPR 22, EN55022 Level ՓB Holdover storage20 ms minimum (independent of input VAC) AC OK>5 ms early warning min. before outputs loose...

Open the catalog to page 2

ENVIRONMENTAL Operating temperature-20C to 50аC (start @ 0C) (derate each output linearly to 50% at 70аC) (-20C to 40аC max. with rear air option) Shock/VibrationMil-Hdbk 810E Humidity95% non-condensing Storage temperature-40C to +85аC Temperature coefficient0.02% per C CoolingInternal DC fan or customer provided air (option) Safety ApprovalsUL, CSA, IEC, VDE, BABT, CB, CE Note: 1. Single output modules only. 2. Single and main of dual output modules only. 3. Contact factory for optional preload if required. >

Open the catalog to page 3

Modules Single Dual Triple Outputs11123 Max output power210W360W600W144W36W Max output current35 A60 120 A10 A2 A Volts 2-60 V2-60 V2-60 V2-28 V2-28 V Standard voltage increments2525251918 Remote sense on outputsYesYesYesYes, bothNo Remote margin/V-ProgramYesYesYesNoNo Module inhibit (isolated)YesYesYes------ Single wire active current shareYesYesYesYes, main only--- Over voltage / Over current protectionYesYesYesYesOver current Minimum load requiredNoNoNoYes (10%). main onlyNo Slots occupied in any MP case12311 Modules VoltageVoltage CodeSingle OutputDual Output > 1 Triple Output > 1...

Open the catalog to page 4

Option Code INPUT = no options Case Size (inches)Slots85-264 VAC180-264 VAC 1 = rear air exhaust 4 = 2.5 x 5 x 105 available slots400 W max.600 W max. 3 = global enable 6 = 2.5 x 5 x 115 available slots600 W max.800 W max. 5 = option package (options 1 & 3) 8 = 2.5 x 7 x 106 available slots800 W max.1000 W max. M = low leakage 1 = 2.5 x 8 x 117 available slots1000 W max.*1200 W max.*1200 W available at high line operation N = low leakage plus option 1 P = low leakage plus option 3 R = low leakage plus option 5 (MP1 Only)(MP8 & MP1 Only)Slot Slot #1 #2 Slot #3 Slot #4 Slot #5 Slot #6 #7 > 2...

Open the catalog to page 5

Control Signal Information, J1 Control Connector Pin No. Function > 1 + Remote Sensesingle or dual o/p main 2 Remote Margin / V. Programsingle o/p 3 Margin Highsingle o/p 4 - Remote Sense / Margin Lowsingle or dual o/p main > 5 Spare 6 Module, Isolated Inhibitsingle or dual o/p 7 Module Inhibit returnsingle or dual o/p > 8 Current Share (SWP)single or dual o/p main 9 + Remote Sense V2dual o/p, single is spare 10 - Remote Sense V2dual o/p, single is spare Single 360 WattSingle 600 Watt Dual 144 WattTriple 36 Watt >

Open the catalog to page 7

J1 Control Connector Standard for all cases Pin No. Function J1-1 Input AC OK - ՓEmitter J1-2 Input AC OK - ԓCollector J1-3 Global DC OK - ԓEmitter > 19.05.750171.456.750 29.051.144171.456.750 M4MTGHOLES4 PLMARKED "B"#8-32MTGHOLES4 PLMARKED "A" 101.604.000 12.70.500 J1-4 Global DC OK - ԓCollector J1-5 Spare J1-6 Global Inhibit/Optional Enable Logic ԓ0 > A AA BB BB J1-7 Global Inhibit/Optional Enable Logic ԓ1 J1-8 Global Inhibit/Optional Enable Return > Standard Airflow J1-9 SELV 5V Housekeeping J1-10 SELV 5V Housekeeping Return > (TYP)M4MTG HOLES 4 PL MOUNTING HOLES DIMENSIONS IDENTICAL ON...

Open the catalog to page 8

8-Inch Case Size: MP1: 2.5 x 8Ԕ x 11 (63.5mm x 203.2mm x 279.4mm) Weight: ԕMP1 Case: 5.0lbs 36W Triple: 0.5 lb. Օ210 W Single: 0.6 lb 360W Single 1.0 lb Օ600W Single: 2.0 lbs. 144W Dual: 0.6 lb > 21 Note: 1.Input: Barrier type. Three No. 6-32 B.H. screws (0.375Ք centers). Max torque: 6 in-lbs. (0.67 N-m). 2.Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins, part...

Open the catalog to page 10

AC-DC Converters 10Pages

Catalog excerpts

All Powersolve Electronics catalogs and technical brochures

AC-DC Converters
10Pages