Impact Sockets
40Pages

IMPACT SOCKETS & SLUGGING WRENCHES www.impactsocket.com

IMPACT SOCKETS, ACCESSORIES AND SOCKET SETS * Standard, Deep and Thinwall Sockets * Up to 3.1/2" square drive Impact Sockets through to 235MM (9.1/8") across the flats * # 5 spline drive to 80mm (4") across the flats * Wide variety of Accessories Freecorner PROFILE The Freecorner profile is provided on the square drives as well as on the hexagon end of Impact Sockets 1/2" square drive and above. CONVENTIONAL PROFILE Corner point contact high stress areas Highlights show contact FREECORNER PROFILE Distributed surface loads relieves possible stress Highlights show contact points away from the...

POWERMASTER 3/8” SQUARE DRIVE IMPACT SOCKETS PAGE 4 1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 6 3/4” SQUARE DRIVE IMPACT SOCKETS PAGE 9 1” SQUARE DRIVE IMPACT SOCKETS PAGE 13 1.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 19 2.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 22 3.1/2” SQUARE DRIVE IMPACT SOCKETS PAGE 25 # 5 SPLINE DRIVE IMPACT SOCKETS PAGE 26 CASTELLATED SOCKETS PAGE 29 STRAIGHT SLUGGING WRENCHES METRIC & SAE PAGE 31 OFFSET SLUGGING WRENCHES METRIC & SAE PAGE 33 OPEN JAW SLUGGING WRENCHES PAGE 34 BOX BI-HEX SLUGGING WRENCHES PAGE 35 STRUCTURAL WRENCHES PAGE 36 INSERT SOCKETS PAGE 38 TURBINE...

IMPACT ACCESSORIES REGULAR EXTENSIONS OAL mm (inch) MODEL NO. 150 (6") 304 (12") E2406 E2412 SHANK DIA mm (inch) HEAD DIA mm (inch) 52.0 (2.047) 86.0 (3.386) Wt Kg. (lbs.) 3.90 (8.58) 6.30 (13.86) DOUBLE MALE EXTENSIONS OAL mm (inch) MODEL NO. 100 (4") 125 (5") 250 (10") 510 (20") S2404 S2405 S2410 S2420 SHANK DIA mm (inch) HEAD DIA mm (inch) 52.0 (2.047) 38.1 (1.500) Wt Kg. (lbs.) 2.50 (5.50) 2.80 (6.16) 3.60 (7.92) 5.10 (11.20) SQUARE ADAPTORS SIZE MODEL NO. 1.1/2" F X 1" M 1.1/2" F X 2.1/2" M 1.1/2" F X #5 M A2416 A2440 A2495 HEAD DIA mm (inch) OAL mm (inch) Wt Kg. (lbs.) 100.0 (3.937)...

IMPACT ACCESSORIES 2 1 “ 2 DOUBLE MALE EXTENSIONS OAL mmc (inch) MODEL NO. 125 (5") 150 (6") 200 (8") S4005 S4006 S4008 250 (10") 380 (15") 510 (20") S4010 S4015 S4020 SHANK DIA mm (inch) HEAD DIA mm (inch) 85.0 (3.346) 63.5 (2.500) SQUARE ADAPTORS SIZE MODEL NO. HEAD DIA mm (inch) OAL mm (inch) 2.1/2" F X 1.1/2" M 2.1/2" F X 3.1/2" M A4024 A4056 127.0 (5.000) 140.0 (5.511) 185.0 (7.283) DOUBLE FEMALE ADAPTORS SIZE MODEL NO. HEAD DIA mm (inch) OAL mm (inch) 2.1/2" F X 1.1/2" F 2.1/2" F X 2.1/2" F 2.1/2" F X 3.1/2" F AN4024 AN4040 AN4056 127.0 (5.000) 115.0 (4.527) 120.0 (4.724) 162.0...

SLUGGING WRENCHES ‘POWERMASTER’ SLUGGING WRENCHES 1. Drop forged from high tensile alloy. 2. Machined to closed tolerances to ISO specifications. 3. Heat treated to achieve optimum Impact resistance. 4. Electroplating followed by black oxidizing to prevent from rusting. 5. Larger striking area to increase safety in use. 6. Greater sectional area for longer life. 7. Hexagon opening depth to ensure positive seating on nuts / bolts. 8. Chamferred openings for ease of location on nuts / bolts. 9. Greater offset height allows clear hammering in offset Slugging Wrenches. 10. Clear marking of size...

STRAIGHT SLUGGING WRENCHES A/F Nominal size across flats D Maximum width of head T Maximum thickness of ring OAL Nominal overall length METRIC BIHEXAGON # METRIC BIHEXAGON (cont.) (g) Table continued next column

229, Pragati Industrial Estate, 316, N. M. Joshi Marg, Bombay-400 011. INDIA. Phone: +91.22.43453100 Fax: +91.22.2307 3761 email: sales@impactsocket.com tubeexpanders.com■ tubecleaners.comi impactsocket.com ■ springbalancers.com