1. Catalogs
  2. Powerbox
  3. ENA400M Series

ENA400M Series

ENA400M Series

ENA400M Series

Product catalog summary
Specifications
  • Input: Voltage and fuse requirements vary by model. Standby current is less than 1mA, and no load current is less than 30mA. Polarity protection is included, and over/under voltage shutdown is specified in the table.
  • Output: Voltage and current specifications are model-dependent. The device is short circuit proof with a constant current limit at approximately 110%. Over voltage protection is not available, but temperature protection with automatic recovery is included. Output ripple is 200 mV p-p at 25ºC, with line and load regulation at 2%.
Environmental Conditions
  • Operates in 100% relative humidity (non-condensing) and temperatures ranging from -20º to +50ºC. It is compliant with RoHS II and REACH standards.
General Features
  • Power efficiency is approximately 95%, with an IP67 rating. The device is cooled by convection and has a lifetime of 5 years at 25ºC with 80% load. MTBF is greater than 300,000 hours. Isolation is 500VDC between input/output and to the case. Dimensions are 150x93x31 mm, with an aluminium housing and polyurethane potting compound. Weight is approximately 850g.
Connections
  • Input and output connections are fixed 0.5m leads. Remote on/off is controlled by a fixed 0.5m lead (green), which connects to IN+ to enable output.
Standards
  • Immunity standards include EN61000-6-2;4-2;4-3;4-4;4-5;4-6, with a surge protection of 2kV. Emission standards are EN55022B (conducted and radiated). Safety standards are not applicable.
Model-Specific Information
  • Four models are listed with varying input voltage ranges, output voltages, and currents. External fuse requirements and voltage shutdown thresholds are specified for each model.
See more

Catalog excerpts

ENA400M Series-1

POWERBOX Automotive Line ENA400-M Series 400W Single Output DC/DC Converter Isolated Preliminary Input Input voltage See table. Polarity protection Yes. Input fuse Recommended external fuse, see table. Over voltage shut down Yes,see table. Under voltage shut down Yes, see table. Output Output voltage See table. Output current See table. Short circuit proof Yes, constant current limit at approx. 110%. Over voltage protection No. Temperature protected Yes, automatic recovery. Limits the output power. Reverse polarity prot. No. Hold-up time No. RoHS II_Yes_ REACH Yes. General Power efficiency~95 %. IP-classIP67. CoolingConvection. Life time5 years @ 25°C 80% load. MTBF>300 000 hours. IsolationInput/output: 500VDC. Input & output to case: 500VDC. Dimensions150x93x31 mm. HousingAluminium. Potting compoundPolyurethane (0,5W/mK). Weight~850g. Input connectionFixed 0,5m leads. Output connectionFixed 0,5m leads. Remote on/offFixed 0,5m lead (green). Connect to IN+ to enable output. Burn-in30min. PCB1,2mm 4 layer 70u FR4. Conformal coatingPCB component side. Safety N/A. Input Under Voltage Input Over Voltage Shut Down Shut Down Model External Input Output Output Output On Off On Off Note Number Fuse Voltage Voltage Current Power

 Open the catalog to page 1
ENA400M Series-2

POWERBOX Automotive Line ENA400-M Series 400W Single Output DC/DC Converter Isolated Specifications are subject to change without notice.

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.