*mydirectindustry

PS-6120FP

Product catalog summary

Specifications:
Tolerances for dimensions are +/- 0.04 in. (1mm) and +/- 0.08 in. (2mm) for height. The battery uses Absorbent Glass Mat (AGM) technology, is valve regulated, spill-proof, and has a rugged ABS case. It is approved for air transport and recognized by U.L.

Performance Specifications:
The nominal voltage is 6 volts with a nominal capacity of 13.00 AH at a 20-hour rate. The battery weighs approximately 4.80 lbs (2.18 kg) and has an energy density of 1.18 W-h/in3. It can discharge a maximum current of 36.0 amperes for 7 minutes and 120.0 amperes for 10 seconds.

Operating Conditions:
The battery operates in a temperature range of -4°F to 122°F for charging and -40°F to 140°F for discharging. It has a shelf life of up to 6 months with 83% capacity retention at 68°F.

Charging Instructions:
For cycle applications, limit initial current to 3.9A and charge until the voltage reaches 7.20 to 7.35 volts. For float service, maintain a constant voltage of 6.75 to 6.90 volts.

Storage and Life Characteristics:
The battery should be charged within 6 months of storage to prevent capacity loss. It has different retention capacities based on temperature and discharge depth.

Contact Information:
Power-Sonic Corporation provides customer service, international sales, domestic sales, and technical support through various contact numbers and emails.

Additional Information:
Further resources such as product catalogs and safety data sheets are available on the Power-Sonic website.

Catalog excerpts

• Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specications Positive: F2 - Quick disconnect tabs, 0.250” x 0.032”- Mate with AMP. INC. FASTON “250” series Negative: F1 - Quick disconnect tabs, 0.187” x 0.032”- Mate with AMP. INC. FASTON “187” series Nominal Capacity Sealed Rechargeable Battery Power-Sonic Corporation Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.

Open the catalog to page 1

Discharge Characteristics Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. Discharge Time Life Characteristics in Stand-By Use Retention Capacity (%) Discharge Time vs. Discharge Current Final Voltage Standing Period (Months) Capacity Retention Ratio (%) Shelf Life & Storage Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss...

Open the catalog to page 2

All Power-Sonic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list