*mydirectindustry

Catalogs
Power-Sonic
PS-6120 Toy

PS-6120 Toy

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the Power-Sonic PS-6120 TH sealed rechargeable battery, which is a 6 Volt, 13.0 Amp-hour battery utilizing Absorbent Glass Mat (AGM) technology.

Features:

AGM technology for enhanced performance.
Valve-regulated, spill-proof design for safe operation in any position.
High energy density with a robust ABS case.
Approved for air transport and recognized by U.L. under file number MH 20845.

Performance Specifications:

Nominal Voltage: 6 volts (3 cells).
Capacity varies with discharge rates: 13.00 AH at 20-hour rate, 12.20 AH at 10-hour rate, 11.05 AH at 5-hour rate, 8.00 AH at 1-hour rate, and 6.38 AH at 15-minute rate.
Approximate Weight: 4.80 lbs (2.18 kg).
Operating Temperature Range: Charge from -4°F to 122°F, Discharge from -40°F to 140°F.

Charging Instructions:

Cycle Applications: Limit initial current to 3.9A, charge until voltage reaches 7.20 to 7.35 volts, then hold until current drops below 130mA.
Float Service: Maintain a constant voltage of 6.75 to 6.90 volts.
Charge within 6 months of storage to prevent capacity loss due to sulfation.

Storage and Shelf Life:

Shelf life retention at 68°F: 97% at 1 month, 91% at 3 months, 83% at 6 months.

Additional Information: For further details, including product catalogs and safety data sheets, visit the Power-Sonic website.

Contact Information: Power-Sonic Corporation, San Diego, CA, USA. Customer service and technical support contact details are provided.

Catalog excerpts

• Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specications • PS-6120 TH - Wire leads with H-type connector Nominal Capacity • PS-6120 TS - Wire leads with S-type connector Safety Switch Sealed Rechargeable Battery Power-Sonic Corporation Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.

Open the catalog to page 1

Discharge Characteristics Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. Discharge Time Life Characteristics in Stand-By Use Retention Capacity (%) Discharge Time vs. Discharge Current Final Voltage Standing Period (Months) Capacity Retention Ratio (%) Shelf Life & Storage Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss...

Open the catalog to page 2

All Power-Sonic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list