*mydirectindustry

PS-6100

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the Power-Sonic PS-6100 F1 sealed rechargeable battery, which operates at 6 volts with a capacity of 12.0 ampere-hours (AH).

Specifications:

Nominal Voltage: 6 volts (3 cells)
Nominal Capacity: Ranges from 12.00 AH at a 20-hour rate to 5.58 AH at a 15-minute rate.
Approximate Weight: 4.30 lbs (1.95 kg)
Energy Density: 1.64 W-h/in³ (99.79 W-h/l)
Specific Energy: 16.74 W-h/lb (36.91 W-h/kg)
Internal Resistance: Approximately 10 milliohms
Max Discharge Current: 36.0 amperes for 7 minutes, 120.0 amperes for 10 seconds
Operating Temperature Range: Charge: -4°F to 122°F (-20°C to 50°C), Discharge: -40°F to 140°F (-40°C to 60°C)
Case Material: ABS Plastic

Features:

Utilizes Absorbent Glass Mat (AGM) technology for enhanced performance.
Valve-regulated, spill-proof construction allows safe operation in any position.
Rugged impact-resistant ABS case and cover.
Approved for air transport by D.O.T., I.A.T.A., F.A.A., and C.A.B.
U.L. recognized under file number MH 20845.

Charging Guidelines:

Cycle Applications: Limit initial current to 3.6A. Charge until battery voltage reaches 7.20 to 7.35 volts at 68°F (20°C).
Float or Stand-By Service: Maintain a constant voltage of 6.75 to 6.90 volts.
Charge within 6 months of storage to prevent permanent capacity loss due to sulfation.

Performance Characteristics:

Shelf Life: Retains 97% capacity after 1 month, 91% after 3 months, and 83% after 6 months at 68°F (20°C).
Life Characteristics: Detailed graphs show capacity retention over time and cycles at various discharge depths and temperatures.

Additional Information: For further details, including product catalogs and safety data sheets, visit the Power-Sonic website.

Contact Information: Includes phone numbers and email addresses for customer service, international sales, domestic sales, and technical support.

Catalog excerpts

• Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specications • F1 - Quick disconnect tabs, 0.187” x 0.032”Mate with AMP. INC. FASTON “187” series Nominal Capacity • F2 - Quick disconnect tabs, 0.250” x 0.032” Mate with AMP. INC FASTON “250” series Sealed Rechargeable Battery Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.

Open the catalog to page 1

Discharge Characteristics Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. Discharge Time Life Characteristics in Stand-By Use Retention Capacity (%) Discharge Time vs. Discharge Current Final Voltage Standing Period (Months) Capacity Retention Ratio (%) Shelf Life & Storage Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss...

Open the catalog to page 2

All Power-Sonic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list