*mydirectindustry

PS-4100

Product catalog summary

Product Overview: The PS-4100 is a sealed rechargeable battery with a nominal voltage of 4 volts and a capacity of 10.0 Ampere-hours. It utilizes Absorbent Glass Mat (AGM) technology, ensuring superior performance and spill-proof operation in any position. The battery is housed in a rugged ABS case and is approved for air transport.

Physical Specifications: The battery dimensions are 4.01 inches in length, 1.97 inches in width, and 3.70 inches in height, with a total height including terminals of 3.85 inches. It weighs approximately 2.50 lbs (1.13 kg).

Performance Specifications: The battery offers various discharge capacities depending on the discharge rate, with a maximum discharge current of 30 amperes for 7 minutes and a short-duration discharge current of 100 amperes for 10 seconds. The internal resistance is approximately 8 milliohms.

Operating Conditions: The battery can operate in a wide temperature range, from -4°F to 122°F for charging and -40°F to 140°F for discharging. It retains 97% of its nominal capacity after 1 month of storage at 68°F.

Charging Instructions: For cycle applications, limit the initial current to 3A and charge until the voltage reaches 4.8 to 5.0 volts. For float or standby service, maintain a constant voltage of 4.5 to 4.6 volts. It is crucial to charge the battery within 6 months of storage to prevent capacity loss due to sulfation.

Life Characteristics: The battery's life in standby use and cyclic use is depicted in graphs, showing capacity retention over time and cycles. The discharge characteristics are also illustrated, indicating discharge time versus current at various temperatures.

Contact Information: For customer service, international sales, domestic sales, and technical support, contact details are provided, along with a reference to the Power-Sonic website for further information and resources.

Catalog excerpts

• Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specications 3.2 • F1 - Quick disconnect tabs, 0.187” x 0.032”Mate with AMP. INC. FASTON “187” series Nominal Capacity Sealed Rechargeable Battery L: 4.01 (102) W: 1.97 (50) H: 3.70 (94) HT: 3.85 (98) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.

Open the catalog to page 1

PS-4100 4 Volt 10.0 AH Discharge Characteristics Charging is not necessary unless 100% of capacity is required. Charging before use is necessary to help recover full capacity. Charge may fail to restore full capacity. Do not let batteries reach this state. Discharge Time Life Characteristics in Stand-By Use Retention Capacity (%) Discharge Time vs. Discharge Current Final Voltage Standing Period (Months) Capacity Retention Ratio (%) Shelf Life & Storage Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise...

Open the catalog to page 2

All Power-Sonic catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list