PS SERIES Emergency Lighting Fire & Security FEATURES •• Absorbent Glass Mat (AGM) technology for superior performance Rechargeable Sealed Lead Acid Battery PS – General Purpose Series •• Valve regulated, maintenance free spill proof construction •• Power/volume ratio yielding excellent energy density •• Rugged vibration and impact resistant ABS case F1: Quick disconnect tabs, 0.187" x 0.032" – Mate with AMP. INC. FASTON “187” series •• Gas recombination technology •• 5 year design life APPROVALS •• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. •• U.L. recognized •• ISO9001:2015 – Quality management systems PERFORMANCE SPECIFICATIONS Nominal Voltage Nominal Capacity 20-hr. (125mA to 10.50 volts) 10-hr. (220mA to 10.50 volts) 5-hr. (400mA to 10.20 volts) 1-hr. (1.5A to 9.00 volts) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. L: 7.00 (178) W: 1.38 (35) H: 2.36 (60) HT: 2.56 (65) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for CORPORATE HEADQUARTERS data subject to change without notice. POWER-SONIC EUROPE LIMITED height dimensions. All (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: [email protected] Internal Resistance (approx.) Max Short-Duration Discharge Current (10 Sec.) Sealed Rechargeable Battery Approximate Weight Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Operating Temperature Range Charge Discharge Power Sonic Chargers (EMEA – EUROPE, MIDDLE EAST AND AFRICA) 3 Buckingham Square, Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: [email protected] To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notic

LIFEAmbient Temperature 20˚CSTAND-BY USE CHARACTERISTICS IN (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Float Charging Voltage 2.25 - 2.30 V/Cell Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully...