12V 18.0 AH @ 20-hr. 12V 17.0 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PS - General Purpose Series TERMINALS: (mm) F2: Quick disconnect tabs, 0.250" x 0.032" - Mate with AMP. INC FASTON "250” series Threaded insert with 5mm stud fastener 12mm M5 FEATURES • 10 - 12 year design life • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, maintenance free spill proof construction • Power/volume ratio yielding excellent energy density • Rugged vibration and impact resistant ABS case and cover • Gas recombination technology APPROVALS • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized • ISO9001:2015 - Quality management systems DIMENSIONS: inch (mm) PERFORMANCE SPECIFICATIONS L: 7.13 (181) W: 3.00 (76) H: 6.59 (167) HT: 6.59 (167) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Nominal Voltage 12 volts (6 cells) HT mo Approximate Weight Internal Resistance (approx.) Max Short-Duration Discharge Current (10 Sec.) Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Operating Temperature Range Charge Discharge Case CORPORATEHEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: [email protected] POWER-OOSIC E UR0P E LIMITOD (EMEA - EUROPE, MIDDLE EAST AND AFRICA) 3 Buckingham Square, Hurricane Way, Wickford, Easex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: [email protected] To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E Power Sonic Chargers ABS Plastic PSC-122000A-C PSC-122000-PC PSC-124000-PC PSC-124000A-C

LIFEAmbient Temperature 20˚CSTAND-BY USE CHARACTERISTICS IN (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Float Charging Voltage 2.25 - 2.30 V/Cell Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully...