TRUSTED BATTERY SOLUTIONS PS SERIES General Emergency Medical Purpose Lighting PS-12170VdS Rechargeable Sealed Lead Acid PS - General Purpose Series 12V 17.0 AH @ 20-hr. 12V 16.0 AH @ 10-hr. Battery FEATURES • VdS and NCP approved VRLA battery • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, maintenance free spill proof construction TERMINALS: (mm) T12: Threaded insert with 5mm stud fastener W: 3.03 (77) H: 6.59 (l67.5) HT: 6.59 (l67.5) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. • Power/volume ratio yielding excellent energy density • Rugged vibration and impact resistant ABS case and cover • Gas recombination technology APPROVALS • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized • ISO9001:2015 - Quality management systems PERFORMANCE SPECIFICATIONS Nominal Voltage Nominal Capacity 20-hr. (850mA to 10.50 volts) 10-hr. (1.60A to 10.50 volts) 5-hr. (2.84A to 10.20 volts) Approximate Weight Internal Resistance (approx.) Max Short-Duration Discharge Current (10 Sec.) Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Operating Temperature Range Charge Discharge Case CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 7550 Panasonic Way, San Diego, POWER-SONIC EUROPE LIMITED (EMEA - EUROPE, MIDDLE EAST AND AFRICA) 3 Buckingham Square, Hurricane Way, Wickford, Power Sonic Chargers To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E

LIFEAmbient Temperature 20˚CSTAND-BY USE CHARACTERISTICS IN (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Float Charging Voltage 2.25 - 2.30 V/Cell Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully...