PS SERIES Emergency Lighting Fire & Security FEATURES •• Absorbent Glass Mat (AGM) technology for superior performance Rechargeable Sealed Lead Acid Battery PS – General Purpose Series •• Valve regulated, maintenance free spill proof construction •• Power/volume ratio yielding excellent energy density •• Rugged vibration and impact resistant ABS case Tin plated brass post with ‘Nut & Bolt’ fasteners 2mm •• Gas recombination technology •• 5 year design life 11mm F2: Quick disconnect tabs, 0.250" x 0.032" – Mate with AMP. INC FASTON “250” series APPROVALS •• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified •• U.L. recognized •• ISO9001:2015 – Quality management systems PERFORMANCE SPECIFICATIONS L Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. F2: L: 5.94 (151) W: 3.86 (98) H: 3.66 (93) HT: 3.86 (98) NB: L: 5.94 (151) W: 3.86 3.66 (93) HT: 4.09 (104) CORPORATE HEADQUARTERS (98) H: POWER-SONIC EUROPE LIMITED (USA AND INTERNATIONAL EXCLUDING EMEA) Internal Resistance (approx.) Nominal Voltage Approximate Weight Max Short-Duration Discharge Current (10 Sec.) Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Operating Temperature Range Charge Discharge Power Sonic Chargers (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for Power-Sonic Corporation 3 Buckingham Square, 7550 Panasonic Way, San Diego, data subject to change without notice. Hurricane Way, Wickford, height dimensions. All California 92154 Essex SS11 8YQ T: +1 (619) 661 2020 T: +44 (0)1268 560686 F: +1 (619) 661 3650 F: +44 (0)1268 560902 E: [email protected] E: [email protected] To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without no

LIFEAmbient Temperature 20˚CSTAND-BY USE CHARACTERISTICS IN (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Float Charging Voltage 2.25 - 2.30 V/Cell Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully...