Catalogs >
Power-Sonic >
PS-1212

PS-1212
2Pages

Catalog excerpts

PS SERIES Emergency Lighting Fire & Security FEATURES •• Absorbent Glass Mat (AGM) technology for superior performance Rechargeable Sealed Lead Acid Battery PS – General Purpose Series •• Valve regulated, maintenance free spill proof construction •• Power/volume ratio yielding excellent energy density •• Rugged vibration and impact resistant ABS case F1: Quick disconnect tabs, 0.187" x 0.032" – Mate with AMP. INC. FASTON “187” series •• Gas recombination technology •• 5 year design life APPROVALS •• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. •• U.L. recognized •• ISO9001:2015 – Quality management systems PERFORMANCE SPECIFICATIONS CORPORATE HEADQUARTERS POWER-SONIC EUROPE LIMITED (USATolerances are EXCLUDING EMEA) AND INTERNATIONAL +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Power-Sonic Corporation 3 Buckingham Square, height dimensions. All data subject to change without notice. 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E Max Short-Duration Discharge Current (10 Sec.) Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month 6 Month Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Internal Resistance (approx.) Sealed Rechargeable Battery Nominal Voltage Approximate Weight Operating Temperature Range Charge Discharge Power Sonic Chargers

Open the catalog to page 1

LIFEAmbient Temperature 20˚CSTAND-BY USE CHARACTERISTICS IN (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Float Charging Voltage 2.25 - 2.30 V/Cell Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a...

Open the catalog to page 2

PS-1212 2Pages

Catalog excerpts

All Power-Sonic catalogs and technical brochures

PS-1212
2Pages