POWERMODULAR SERIES Data Center HIGHLIGHTS •• High Performance, Modular 3-Phase Power Protection •• Scalable up to 2080kVA, with 96% High Efficiency MODULAR UPS DESIGN FOR HIGH DENSITY DATA CENTERS •• PM Series is a scalable, redundant Modular UPS system designed to cost effectively provide high level availability for high density data centers and critical applications. •• True Online Double Conversion and advanced DSP control technology. SCALABLE MODULAR ARCHITECTURE Scalable up to the highest active power rating available through two dimensional modularity: Vertical and Horizontal. •• Capacity of single power module is 10-15-20-25-30-40-50kVA •• The height of single hot swappable power module is 3U •• Standard 1.4m cabinet can hold up to 5 of power modules •• Standard 2m cabinet can hold up to 13 of power modules •• The single UPS cabinet capacity can reach 520KVA and UPS cabinets can operate in parallel configuration to build a system of up to 2080kVA •• Modular Architecture can scale power and runtime as (see SIZE diagram on following page) •• Combines the modular design with the N+X parallel Output Power •• The maximum capacity of a single cabinet is 520kVA. demand grows or as higher levels of availability required. redundancy technology. Cabinets can operate in parallel configuration to build a system of up to 2080kVA. Power Factor CORPORATE HEADQUARTERS POWER-SONIC EUROPE LIMITED Power-Sonic Corporation 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: [email protected] 3 Buckingham Square, Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: [email protected] (USA AND INTERNATIONAL EXCLUDING EMEA) (EMEA – EUROPE, MIDDLE EAST AND AFRICA) To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E

POWERMODULAR SERIES SIZE Up to 520kW with additional 40kW modules Up to 2080kW with additional 520kW cabinets “What you need now and add more modules as you grow” STANDARD ELECTRICAL FEATURES •• Output Power Factor: 0.9 (Optional 1.0) •• Hot Swappable Maintenance (UPS & Battery) •• Separated Bypass •• Maintenance Bypass •• Parallelable up to 4 Cabinets •• Common Battery •• Control of On/Off State of each Module •• Freely Set the Charge Current •• Intelligent Charging •• Mid or Small Power Distributing System •• Selectable Battery Voltage 3 Input 3 Output HOT SWAPPABLE BATTERY MODULES Plug and...

POWERMODULAR SERIES INDEPENDENT CONTROL SYSTEM Every power module is equipped independent control system, and control itself independently according to the sharing message, and the fault module separates from the system automatically. HIGH EFFICIENCY AND LOW TOTAL COST OF OWNERSHIP Designed for highly economical energy consumption and is a perfect fit in your data center and server room. Offering efficiency of up to 96%, THDi of 2% and unity Input Power Factor without harmonic filters PowerModular Series delivers: - Significant energy savings - Lower cooling costs - Smaller generator sizing CORPORATE...

POWERMODULAR SERIES MODULAR ONLINE UPS MODEL INPUT Phase 3 Phase 4 Wires and Ground Rated Voltage Voltage Range Power Factor Bypass Voltage Range Frequency Protection Range: ±10% Current Harmonic Generator Input OUTPUT Phase 3 Phase 4 Wires and Ground Rated Voltage Power Factor Voltage Precision Output Frequceny ±1%, ±2%, ±4%, ±5%, ±10% of the Rated Frequency (Optional) (50/60±0.2) Hz Crest Factor ≤1% With Linear Load ≤4% With Non-Linear Load RS232, RS485, Intelligent Slot x 2 (SNMP Card, Relay Card, Dry Contact Optional) INTERFACE PM Series UPS Module BATTERY Voltage Charge Current (A) ±192V...