1. Catalogs
  2. Power-Sonic
  3. PG Series Long Life Rechargeable Batteries

PG Series Long Life Rechargeable Batteries

PG Series Long Life Rechargeable Batteries

PG Series Long Life Rechargeable Batteries

Product catalog summary
Overview
Power-Sonic specializes in the design, manufacture, and marketing of rechargeable batteries, including sealed lead-acid (SLA), powersport, nickel-cadmium (NiCd), and nickel-metal hydride (NiMH) batteries, as well as battery chargers. These products are utilized in various electronic and industrial applications globally.
Product Specifications
The PG-Series batteries are suitable for standby and primary power applications, featuring sealed, maintenance-free, valve-regulated, spill-proof construction. They offer a long service life of up to 10 years in standby applications, using thick plate designs and advanced paste technology. The batteries employ Absorbent Glass Mat (AGM) technology for efficient gas recombination and safety.
Technical Features
  • Low Internal Resistance: Ensures reliable performance in UPS and telecom applications.
  • Low Self-Discharge: Allows for extended storage periods.
  • Rugged Construction: High-impact resistant ABS plastic case and cover provide resistance to shock, vibration, chemicals, and heat.
  • Designed-In Reliability: Advanced manufacturing and quality assurance guarantee consistent performance.
Applications
  • Standby Power: Used in communications, telecom systems, UPS, marine applications, security systems, and more.
  • Primary Power: Suitable for remote monitoring, solar-powered systems, robotics, and more.
Battery Capacity and Performance
Battery capacity is measured in ampere-hours (AH) and varies with discharge rate. The rated capacity is determined over 10 hours of constant current discharge at 68°F (20°C) to a final voltage of 1.75 volts per cell. Discharge characteristics and open circuit voltage are influenced by ambient temperature and discharge history.
Charging and Maintenance
  • Constant Voltage Charging: Recommended for optimal service life and capacity.
  • Temperature Compensation: Important for maintaining charge efficiency, especially outside the range of 41-95°F (5-35°C).
  • Shelf Life and Storage: Low self-discharge rates allow for long shelf life, with recommended recharging every 6 months if not used.
Environmental Considerations
Temperature affects battery capacity and service life. Higher temperatures increase capacity but decrease service life, while lower temperatures reduce capacity. Proper charging methods and temperature compensation are crucial for maintaining battery performance and longevity.
Charging Characteristics
The document details the charging characteristics of PG-Series batteries in both float charge and cycle charge modes, with graphs and tables illustrating the relationship between charge volume, charging current, and charged voltage at various initial charging currents and constant voltages.
Temperature and Voltage Recommendations
A table provides specific charge voltages for different temperatures, ranging from -40°F (-40°C) to 122°F (50°C), for both cyclic and float use.
Quality Assurance
Power-Sonic Corporation emphasizes its commitment to quality through IQC, PQC, and ISO 9001 quality management systems. All batteries undergo 100% testing with advanced computer equipment before being released for sale.
Standards and Certifications
The batteries meet international standards including JIS, DIN, and IEC, and have UL certification.
Contact Information
Contact details for corporate headquarters, domestic, international, and European sales are provided, including phone numbers, fax numbers, and email addresses.
Company Commitment
Power-Sonic management and staff are dedicated to providing excellent service, fulfilling customer needs, and delivering high-quality products on time and at competitive prices.
See more

Catalog excerpts

PG Series Long Life Rechargeable Batteries-1

PG-SERIES LONG LIFE BATTERIES

 Open the catalog to page 1
PG Series Long Life Rechargeable Batteries-2

Power-Sonic has more than 39 years of battery industry experience and today our batteries are sold in more than 70 countries world-wide. Since our inception in 1970, our focus has been the design, manufacture and marketing of rechargeable batteries, specifically: • Sealed lead-acid (SLA), also called valve regulated lead-acid (VRLA) batteries • Powersport batteries • Sealed nickel-cadmium (NiCd) and nickel-metal hydride (NiMH) batteries • NiCd and NiMH configured packs (cell assemblies) • Battery Chargers Our products are widely used in an ever broadening range of electronic and industrial applications....

 Open the catalog to page 2
PG Series Long Life Rechargeable Batteries-3

PG-Series Batteries Features Sealed/Maintenance-Free Valve-regulated, spill-proof construction allows troublefree, safe operation in any position. The sealed system eliminates electrolyte checking and refilling. Gases generated during charge are recombined in a unique “oxygen cycle”. Long Service Life Thick plate design based on sturdy lead-calcium grids and advanced paste technology provide design lives of up to 10 years in standby applications. AGM Technology Absorbent Glass Mat technology, in tandem with one-way pressure relief valves, result in efficient gas recombination and safety of operation...

 Open the catalog to page 3
PG Series Long Life Rechargeable Batteries-4

Battery Capacity The capacity of a battery is the total amount of electrical energy available from a fully charged cell. Its value depends on the discharge current, the temperature during discharge, the final (cut-off) voltage and the history of the battery. Capacity, expressed in ampere-hours (AH), is the product of the current discharged and the length of discharge time. Battery capacity varies according to the discharge rate being used. Capacity increases when discharge current is less than the 10-hr. rate and decreases when the load current is higher. The rated capacity of a Power-Sonic PG-Series...

 Open the catalog to page 4
PG Series Long Life Rechargeable Batteries-5

Effects of Temperature Actual capacity is a function of ambient temperature and rate of discharge. At 68°F (20°C) rated capacity is 100%. Above this temperature capacity increases, below it capacity decreases as temperature falls. While raising ambient temperatures increases capacity, it also decreases useful service life. It is estimated that battery life is halved for each 18°F (10°C) above normal room temperature. Cyclic Use The number of charge/discharge cycles depends on the capacity taken from the battery - a function of discharge rate and depth of discharge - operating temperature and...

 Open the catalog to page 5
PG Series Long Life Rechargeable Batteries-6

Shelf Life and Storage Special alloy electrodes and high purity lead impart low self-discharge rates and, consequently, a long shelf life. The rate of self-discharge is approximately 3% per month when batteries are stored at 68°F (20°C). At low temperatures it is nearly negligible, at higher ones self-discharge increases. To maximize battery life and performance: • Recharge after each use • Do not store in a discharged state • Store at 68°F (20°C) or lower • Recharge every 6 months if not used Charging Dependable performance and long service life depend upon correct charging. Faulty procedures...

 Open the catalog to page 6
PG Series Long Life Rechargeable Batteries-7

Temperature Compensation Power-Sonic batteries perform well both at low and high temperatures. At low temperatures, however, charge efficiency is reduced; at temperatures above 113°F (45°C), charge efficiency increases so rapidly that there is a danger of thermal runaway if temperature compensation is not precise. The effect of temperature on charge voltage is less critical in float applications than in cyclic use, where relatively high charge currents are applied for the purpose of short recharge times. Temperature effects should definitely be considered when designing or selecting a charging...

 Open the catalog to page 7
PG Series Long Life Rechargeable Batteries-8

Quality is always #1 We employ IQC, PQC and ISO 9001 quality management systems to test materials, monitor manufacturing processes and evaluate fi nished products prior to shipment. All our batteries are 100% tested with advanced computer equipment prior to being released for sale. Power-Sonic management and staff are committed to providing the best possible service to satisfy our customer’s needs, and fulfi ll our undertaking to deliver top grade products on time and at a competitive price. Our batteries meet international standards including JIS, DIN and IEC and have UL certifi cation. Corporate...

 Open the catalog to page 8

All Power-Sonic catalogs and technical brochures

  1. PS-12200

    2  Pages

  2. PS-1220

    2  Pages

  3. PS-12180S

    2  Pages

  4. PS-12180HD-M5

    2  Pages

  5. PS-12170VdS

    2  Pages

  6. PS-121400S FR

    2  Pages

  7. PS-12140

    2  Pages

  8. PS-1212VdS

    2  Pages

  9. PS-12120VdS

    2  Pages

  10. PS-12120S

    2  Pages

  11. PS-12120L

    2  Pages

  12. PS-12120

    2  Pages

  13. PS-1212

    2  Pages

  14. PS-121100S

    2  Pages

  15. PS-12100H

    2  Pages

  16. PS-121000S

    2  Pages

  17. PS-12100

    2  Pages

  18. PS-1208WL

    2  Pages

  19. PS-1208JST FR

    2  Pages

  20. POWERSPORT

    20  Pages

  21. POWERMODULAR

    4  Pages

  22. POWERLEVEL T3

    5  Pages

  23. POWERLEVEL

    4  Pages

  24. POWERCLEVER

    4  Pages

  25. PG-12V75 FR

    2  Pages

  26. PSH-1255 FR

    2  Pages

  27. PS-832

    2  Pages

  28. PS-6200

    2  Pages

  29. PS-6120 Toy

    2  Pages

  30. PS-6120FP

    2  Pages

  31. PS-6100

    2  Pages

  32. PS-682

    2  Pages

  33. PSH-655FR

    2  Pages

  34. PSG-650

    2  Pages

  35. PS-650LS & LF

    2  Pages

  36. PS-628

    2  Pages

  37. PSG-625

    2  Pages

  38. PS-612

    2  Pages

  39. PS-610

    2  Pages

  40. PS-605

    2  Pages

  41. PS-4100

    2  Pages

  42. PSG-480

    2  Pages

  43. PS-260

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.