Features • Long Service Life - Thick plate design and efficient gas recombination yield a service life expectancy of up to 10 years in standby mode. • Low Internal Resistance - Superb high-rate discharge characteristics ensure reliable performance in UPS and Telecom applications. • Maintenance-Free, Non-Spillable - Proven VRLA technology guarantees safe operation without maintenance and ‘nonrestricted article’ status for transportation. • Handles - Integral carrying handles. • Low Self-Discharge - Lead-calcium alloy grids and use of high purity lead account for superior shelf-life characteristics permitting storage for extended periods of time. • Designed-In Reliability - Cutting-edge manufacturing and process control combined with meticulous quality assurance procedures guarantee consistent and dependable performance. • T6: Threaded insert w. 6 mm stud fastener Nominal Capacity Sealed Long Life Rechargeable Battery Power-Sonic Corporation www.power-sonic.com L: 10.24 (260) W: 6.61 (168) H: 8.27 (210) HT: 8.51 (216) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.

Constant Current & Power Discharge Ratings AMPS/WATTS PER CELL @ 25° C FINAL VOLTAGE Discharge Time vs. Discharge Current Discharge Characteristics Discharge Time Discharge Time Shelf Life & Storage Charging Cycle Applications: Limit initial current to 20.0A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 750mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage. “Float” or “Stand-By” Service: Hold battery across constant voltage source...